Plus de 300 000 clients - nous vous disons merci !

40 000+ produits pour la chasse et le tir sportif

Améliorez votre tir avec le frein de bouche #4 MUZZLE BRAKE 22 cal. 🛠️ Réduit le recul et stabilise votre canon pour des performances optimales!

SHREWD #4 MUZZLE BRAKE 22 CALIBER - SHREWD #4 MUZZLE BRAKE 22 CALIBER 5/8-24 CHROME MOLY SILVER

860100425

Options disponibles:

SHREWD #4 MUZZLE BRAKE 22 CALIBER 5/8-24 CHROME MOLY SILVER
79.9 EUR 6 79,90 € *
Finition: Argent Référence: 860100425
En stock
79.9 EUR 6 79,90 € *
SHREWD #4 MUZZLE BRAKE 22 CALIBER 5/8-24 SS SILVER
79.9 EUR 1 79,90 € *
Finition: Acier Inox Référence: 860101425
En stock
79.9 EUR 1 79,90 € *
79.9 79.9 2 EUR
79.9 EUR 79,90 €

Le prix inclut la TVA mais pas la livraison .

Référence: 860100425

N° fabr.: NONE

Le frein de bouche multi-port atténue le recul ressenti et réduit la montée du canon. Une seule chambre d'expansion et 42 ports au total, 21 de chaque côté, inclinés à 7° vers l'avant, offrent un contrôle maximal du recul. Un travail d'armurerie est nécessaire. Livré avec un trou de sortie de .220" (nominal) qui doit être agrandi à .020" de plus que le diamètre de la balle. Peut être élargi pour permettre des balles jusqu'à .44 calibre. L'extérieur arrière du compensateur peut être usiné pour s'adapter au canon.
En stock
1
2
3
4
5
6
7
8
9
10+

Options disponibles:

SHREWD #4 MUZZLE BRAKE 22 CALIBER 5/8-24 CHROME MOLY SILVER
79.9 EUR 6 79,90 € *
Finition: Argent Référence: 860100425
En stock
79.9 EUR 6 79,90 € *
SHREWD #4 MUZZLE BRAKE 22 CALIBER 5/8-24 SS SILVER
79.9 EUR 1 79,90 € *
Finition: Acier Inox Référence: 860101425
En stock
79.9 EUR 1 79,90 € *

Description:

Afficher l'original (anglais)
Le frein de bouche multi-port atténue le recul ressenti et réduit la montée du canon. Une seule chambre d'expansion et 42 ports au total, 21 de chaque côté, inclinés à 7° vers l'avant, offrent un contrôle maximal du recul. Un travail d'armurerie est nécessaire. Livré avec un trou de sortie de .220" (nominal) qui doit être agrandi à .020" de plus que le diamètre de la balle. Peut être élargi pour permettre des balles jusqu'à .44 calibre. L'extérieur arrière du compensateur peut être usiné pour s'adapter au canon.

SPÉCIFICATIONS : acier 4140, chrome moly (CM), brut ou acier inoxydable 416 (SS), finition satinée. Longueur de 2-5⁄8" (6,6 cm). Diamètre extérieur ; #4 - 1" (2,5 cm), .865" (22 mm).

Points forts

  1. Le frein multi-ports réduit le recul et le relèvement du canon grâce à une conception unique avec 42 ports.
  2. Modification par un armurier nécessaire pour adapter le trou de sortie au diamètre de la balle.
  3. Compatible avec des balles jusqu'au calibre .44 et peut être usiné pour s'adapter au canon.

Caractéristiques

  • Filetages: 5/8-24
  • Finition: Argent
  • Matériau: Chrome Moly
  • Taille: 1
  • Type d'arme: Universel Carabine
  • Poids du colis: 0,181kg
  • Hauteur d'expédition: 18mm
  • Largeur d'expédition: 117mm
  • Longueur d'expédition: 226mm

Détails de l'article

Fabriqué au USA

Avis des clients

Notes des clients (2)

5 / 5
Fortement recommandé

Brownells USA excellent addition to any barrel 02/06/2014

I use this brake fitted to a 6.5 Grendel bull barrel (20"). The brake can be turned to match the barrel diameter without any problems, but you must adjust cutting speed in your lathe for the necessary interrupted cuts.

I first threaded a short segment to fit the brake and used this to hold the brake in the 3-jaw chuck with the tailstock live center in the brake muzzle. The brake can then be turned to match the barrel diameter. There is plenty of metal to do this operation.

The bore was then drilled to .020 over (N-letter drill for 6.5mm, as I recall). The brake did not fit my pre-threaded barrel muzzle flush. Instead of fitting a crush washer I machined a spacer to match the brake and barrel diameter by using the holding fixture that I machined. I inserted a steel washer behind the brake and then turned the washer to the diameter of the finished brake.

To install the brake so that it can be removed yet will not loosen, I used Permatex non-hardenening sealant--the kind you use for automotive water pump gaskets--to seal the barrel threads.

This is a nice brake that is a lot less work than machining a complete one out of a piece of stock. All my work was done using a 6" Atlas lathe and standard tooling.

Fortement recommandé

Brownells USA They really work! 04/05/2011

Can be machined into a barrel contour. Really does reduce recoil and muzzle jump. My 300WSM shoots like a 243Win with it on. Take it off, and my 18-pound rifle jumps four inches off the bag. Nothing at all wrong or deficient about this product. Have four of them on various other rifles. Love them. Just ordered another...

Le saviez-vous ?

Informations sur le fabricant

Opérateur économique responsable conformément au règlement de l'UE

Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr

Oups ! Quelque chose s’est mal passé.

Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.

Retour en haut de page