Insert à Emplacement Direct Réduit Temporairement la Capacité du Chargeur
L'insert en polymère dur se clipse dans le fond du chargeur pour limiter la capacité pour des applications sportives ou de chasse. S'installe facilement sans outils et ne nécessite aucune modification permanente du chargeur. Ne rendra pas un chargeur interdit légal, car la réduction de capacité n'est pas permanente. Moins 5 réduit la capacité de 5 cartouches.
SPECS : Polymère dur renforcé moulé, noir. Vendu par paquets de 3. S'adapte uniquement aux PMAG Gen M3 de Magpul. Les modèles 5.56 s'adaptent aux PMAG Gen M3 pour les fusils chambrés en 5.56x45 NATO et .223 Rem. 5.56 Moins 5 s'adapte aux chargeurs de 10, 20 et 30 cartouches. Cela ne s'adapte pas aux chargeurs de 20 cartouches Gen 3.
Plus...
Drop-In Insert Temporarily Reduces Mag Capacity
Hard polymer insert snaps into the floorplate to limit capacity for sporting or hunting applications. Installs easily without tools and requires no permanent alteration of the magazine. Will not make a banned magazine legal, as capacity reduction is not permanent. Minus 5 reduces capacity by 5 rounds.
SPECS: Reinforced molded hard polymer, black. Sold in paks of 3. Fits Magpul Gen M3 PMAGs only. 5.56 models fit Gen M3 PMAGs for rifles chambered in 5.56x45 NATO and .223 Rem. 5.56 Minus 5 fits 10-, 20- and 30-rd mags. These do not fit Gen 3 20 round.
Plus...
Évaluations client de MAGPUL MINUS 5RD LIMITER FOR 5.56X45 PMAG GEN 3 MAGAZINE BLACK 3/PK
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3
load less than 5 rounds(01/07/2014)
We purchased several of these minus 5 round limiters as well as Pmag 10 round gen3 mags for customers who were planning to hunt with their rifles and needed to limit their mags to 5 rounds to be legal for hunting. These devices work like a plug in your shotgun to reduce the mag capacity, in this case by 5 rounds. We had rifles chambered in .223/5.56 and 300 Blackout. In both cases after installing the limiters we found the magazines would not seat fully with 5 rounds loaded in the magazine. Function with 4 rounds was flawless however. For game in North America 4 rounds should be sufficient for anyone who has practiced with their rifle, but if you think you need more, then load 4 rounds, chamber 1 and add another to the magazine. These are good devices and we are pleased to see Brownells now carries them for the 7.62 Pmag. We have customers waiting for them.
-6 round limiter not -5(14/01/2015)
Should be marketed as a sometimes -5 sometimes -6 limiter. per magpul customer support, this will barely allow 5 rounds into the magazine (if you start with a 10 round mag), and the magazine will not be able to be inserted with the bolt closed. Would have been nice to know that before hand.
Now one of the two mags I installed these in worked as you would expect... 5 rounds, can be inserted on closed bolt, dust cover can be installed.
The other, only works properly with 4 rounds. this is, according to magpul customer support, how it is supposed to work.
An inexpensive insurance policy(26/08/2016)
Will always allow 5 rounds in magazine, but sometimes will not allow Magazine to be seat and you have to remove one for magazine to seat. If it only allows 4 rounds, chamber one and then top off magazine. Either way you can keep rifle legal when hunting weather 3 or 5 rounds in local area.
DO NOT LOAD 5 ROUNDS(07/11/2016)
Using this limiter in a 10 round magazine, DO NOT load 5 rounds into the magazine. Doing so will not allow the magazine to seat properly in the magwell with the bolt closed and the top round may not feed properly. If you load 4 rounds in the magazine and one in the chamber, it will work perfectly. MAGPUL needs to place a notice on the packaging to this effect.
Référence: 100011629 MAGPUL MINUS 5RD LIMITER FOR 5.56X45 PMAG GEN 3 MAGAZINE BLACK 3/PK Ref Fabricant: MAG285-BLK873750008080 L'insert en polymère dur se clipse dans le fond du chargeur pour limiter la capacité pour des applications sportives ou de chasse. S'installe facilement sans outils et ne nécessite aucune modification permanente du chargeur. Ne rendra pas un chargeur interdit légal, car la réduction de capacité n'est pas permanente. Moins 5 réduit la capacité de 5 cartouches.
Insert à Emplacement Direct Réduit Temporairement la Capacité du Chargeur
L'insert en polymère dur se clipse dans le fond du chargeur pour limiter la capacité pour des applications sportives ou de chasse. S'installe facilement sans outils et ne nécessite aucune modification permanente du chargeur. Ne rendra pas un chargeur interdit légal, car la réduction de capacité n'est pas permanente. Moins 5 réduit la capacité de 5 cartouches.
SPECS : Polymère dur renforcé moulé, noir. Vendu par paquets de 3. S'adapte uniquement aux PMAG Gen M3 de Magpul. Les modèles 5.56 s'adaptent aux PMAG Gen M3 pour les fusils chambrés en 5.56x45 NATO et .223 Rem. 5.56 Moins 5 s'adapte aux chargeurs de 10, 20 et 30 cartouches. Cela ne s'adapte pas aux chargeurs de 20 cartouches Gen 3.
Plus...
Drop-In Insert Temporarily Reduces Mag Capacity
Hard polymer insert snaps into the floorplate to limit capacity for sporting or hunting applications. Installs easily without tools and requires no permanent alteration of the magazine. Will not make a banned magazine legal, as capacity reduction is not permanent. Minus 5 reduces capacity by 5 rounds.
SPECS: Reinforced molded hard polymer, black. Sold in paks of 3. Fits Magpul Gen M3 PMAGs only. 5.56 models fit Gen M3 PMAGs for rifles chambered in 5.56x45 NATO and .223 Rem. 5.56 Minus 5 fits 10-, 20- and 30-rd mags. These do not fit Gen 3 20 round.
Plus...
Évaluations client de MAGPUL MINUS 5RD LIMITER FOR 5.56X45 PMAG GEN 3 MAGAZINE BLACK 3/PK
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3
load less than 5 rounds(01/07/2014)
We purchased several of these minus 5 round limiters as well as Pmag 10 round gen3 mags for customers who were planning to hunt with their rifles and needed to limit their mags to 5 rounds to be legal for hunting. These devices work like a plug in your shotgun to reduce the mag capacity, in this case by 5 rounds. We had rifles chambered in .223/5.56 and 300 Blackout. In both cases after installing the limiters we found the magazines would not seat fully with 5 rounds loaded in the magazine. Function with 4 rounds was flawless however. For game in North America 4 rounds should be sufficient for anyone who has practiced with their rifle, but if you think you need more, then load 4 rounds, chamber 1 and add another to the magazine. These are good devices and we are pleased to see Brownells now carries them for the 7.62 Pmag. We have customers waiting for them.
-6 round limiter not -5(14/01/2015)
Should be marketed as a sometimes -5 sometimes -6 limiter. per magpul customer support, this will barely allow 5 rounds into the magazine (if you start with a 10 round mag), and the magazine will not be able to be inserted with the bolt closed. Would have been nice to know that before hand.
Now one of the two mags I installed these in worked as you would expect... 5 rounds, can be inserted on closed bolt, dust cover can be installed.
The other, only works properly with 4 rounds. this is, according to magpul customer support, how it is supposed to work.
An inexpensive insurance policy(26/08/2016)
Will always allow 5 rounds in magazine, but sometimes will not allow Magazine to be seat and you have to remove one for magazine to seat. If it only allows 4 rounds, chamber one and then top off magazine. Either way you can keep rifle legal when hunting weather 3 or 5 rounds in local area.
DO NOT LOAD 5 ROUNDS(07/11/2016)
Using this limiter in a 10 round magazine, DO NOT load 5 rounds into the magazine. Doing so will not allow the magazine to seat properly in the magwell with the bolt closed and the top round may not feed properly. If you load 4 rounds in the magazine and one in the chamber, it will work perfectly. MAGPUL needs to place a notice on the packaging to this effect.