Ne lutte plus jamais pour charger ton AR-15 ! Ce loquet de remplacement te permet d'accéder à ta poignée de chargement avec facilité. Particulièrement populaire parmi ceux qui ont une lunette sur leur AR-15, ou ceux qui portent des gants en tirant. Ce loquet dispose d'une surface supplémentaire à atteindre lorsque tu dois charger ton fusil AR-15. Construction en acier avec une finition gris foncé. Comprend uniquement le loquet, utilise le ressort et la goupille existants. (N'inclut pas le ressort ou la goupille).
SPÉCIFICATIONS : Compatible avec - poignées de chargement standard AR15/M16. Finition - Grise. Construction - Acier. Comprend - uniquement le loquet. N'inclut pas le goupille ou le ressort.
Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).
SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.
Points forts
Accède facilement à ta poignée de chargement AR-15 avec ce loquet de remplacement.
Idéal pour les utilisateurs de lunette ou ceux qui portent des gants.
Construction en acier avec finition gris foncé, loquet uniquement inclus.
Caractéristiques
Type d'arme:AR-15
Poids du colis:0,041kg
Hauteur d'expédition:19mm
Largeur d'expédition:51mm
Longueur d'expédition:76mm
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
Avis des clients
Notes des clients (10)
4,6 / 5
Fortement recommandé
Good low cost high value upgrade 28/12/2017
Donât let the picture fool you itâs bigger and itâs definitely not black. Fairly easy to install if youâve built ARâs before. It really works well with or without optics. The latch is sturdy enough to rack with one finger. I installed it on my WMD nib-x coated charging handle and itâs so smooth
Fortement recommandé
REAL DEAL HANDS DOWN 20/05/2017
Built like a tank , fit Perfect , three min to install. I'm a self taught redneck AR builder that spent a few min online researching the best buy for the money . I found that every man card holding scope user must have. . just took 4 minutes to install. Beat that! Long live freedom flies!
Fortement recommandé
No Gunsmith Required 15/03/2017
Easy to Install on my stock DPMS handle. Be careful of the spring. May require light sanding for some handles. Great for operating handle with left hand and perfect if you have full size optics mounted.
Recommandé
Worth it 30/12/2016
It isn't an exact match in color as others have stated. More of a blued steel than black anodized aluminum look. Doesn't bother me a bit. Works great. Feels natural in the hand when operating the CH. Does stick out far but not too far. Compared it to a Bcm/Vltor & it is just a hair shorter than their large model. I have several of the B/V CHs & now realize I could've just bought standard CHs & installed this latch on them which would've saved me some money. Only problem I foresee is if you use a sling & keep the gun close to your body, the latch could be uncomfortable sticking into your stomach or chest. I have seen this with the B/V large CH. That's why I'd prefer it to be slightly smaller, but it's still worth it. Easy install with a 1/16" punch. Does not include roll pin or spring in case anyone is wondering. I definitely recommend this latch if you need to upgrade from a standard one.
Fortement recommandé
these work 01/11/2016
These are easy to install and they increase the ability to grasp the charging handle. I use shooting gloves when at the range so this product is helpful, when using a scope or any thing that aids the sight profile.
Fortement recommandé
QUALITY! 03/08/2016
This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!
Recommandé
Great Value 21/03/2016
Make no mistake, this is an oversized latch. Not as over-the-top as some others, but it sticks out a pretty decent length. Also note that it is more of a dull gray color - it doesn't necessarily look out of place on a black receiver, but it doesn't altogether match either. In any case, the function will please many, disengaging smoothly and promoting firm operation of the mechanism. For me it was actually a little too slick - the catch is smooth enough and the body engage-able enough that it created an impression of looseness that I don't think was actually there. But the edges are nicely rounded to avoid scrapes and excessive snagging, and the gray finish seems to hold up pretty well. It could do with just a bit of refinement as a design, but for such a great price, someone looking for an oversized latch won't be disappointed.
Recommandé, avec réserves
Yankee Hill Latch 07/01/2016
The pro's: great fit. wide handle with no rough edges and it was easy to install.
The Cons: it is NOT BLACK!!!! It is Battleship Gray! Not even in the realm of black.
I was sorely disappointed... It is advertised as BLACK. I now have a black rifle with a GRAY charging handle latch!
I will be contacting Brownells about the issue. They either need to correct their advertising or,if by some chance I got an odd one, check the product and ensure it matches the description before they ship it.
The photo doesn't show the gray well. It's far more gray than pic!
Fortement recommandé
YHM Charge Handle Latch 14/11/2015
Purchased for a 5.56 gun that had a OEM latch.I have used the ambi type and square oversize type before on others.
After installing this one,I went back and bought a few more to replace my other upgraded ones.I kind of prefer the same feel on all the guns.Now I have put these on my ARs in 308 and 243 as well.
Yes I like this latch.
Only CON.The roll pin is kind of a tricky little deal.Careful the hole is lined up and do not beat it up and make it bigger(use the correct roll pin punch).Center punch next to the holes(lightly) when finished to hold the roll pin secure.Keep in mind the handle is aluminum.
Fortement recommandé
BUY THIS 13/05/2015
I bought one of these initially from a different website before Brownells started carrying it and was hooked instantly. Once Brownells picked them up I bought 3 more (and will probably buy another 3-4 eventually). A standard handle with this latch is comparable to a BCM large latch charging handle; not identical, and not exactly as good, but comparable. If you're on a budget, this is the way to go. Don't buy any other latches; I'm even considering replacing the PRI latch on my gas buster charging handle, because these are so much nicer. Gives more than enough purchase, isn't so thin that it hurts to pull back with a knife-style hand angle, and it's made by YHM instead of some random over-seas manufacturer like a lot of other latches. Buy this just to try it out. You won't regret it. I just wish I had 3 hands to make installing it easier.
Opérateur économique responsable conformément au règlement de l'UE
Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr
Derniers visualisés
Oups ! Quelque chose s’est mal passé.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.
Améliore ton AR-15 avec le latch de chargement Yankee Hill. 🔧 Pratique et robuste, il facilite le chargement même avec des gants!
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Les ressorts à puissance réduite offrent une détente de 3,5 livres avec des détentes J.P. et de 4,5 à 5 livres avec des composants standard.
Inclut tous les ressorts nécessaires et des instructions pour polir la surface de contact pour une détente lisse.
Conçu uniquement pour un usage récréatif, ne pas utiliser dans des armes à feu de service ou de défense à domicile.
Ressorts de remplacement de haute qualité pour assurer le bon fonctionnement de votre AR-15.
Disponibles à l'unité ou en packs de 3, parfaits pour des pièces de rechange d'urgence.
Fabriqués avec des tolérances précises, équivalents aux pièces d'origine.
Permet d'installer une crosse pliante sur tout AR-15 pour un transport facile.
Compatible avec les systèmes à emprunt de gaz standard et à piston, ainsi que divers tubes d'extension.
Fonctionnement à un seul bouton pour un pliage rapide et tension de charnière réglable.
Ressorts de rechange de haute qualité pour un fonctionnement optimal de votre AR-15.
Idéal pour les réparations d'urgence ou l'assemblage de votre carabine.
Disponible à l'unité ou en pack de 3 pour répondre à vos besoins.
Aide et contact
Newsletter
Vue classique
Vue mobile