Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

APEX TACTICAL SPECIALTIES INC
ACTION ENHANCEMENT TRIGGER W/GEN 3 TRIGGER BAR FOR GLOCK®

856008005611 100018172

La gÃ¢chette dâamÃ©lioration de lâaction tactique Apex pour GlockÂ® est un remplacement direct de la gÃ¢chette en polymÃ¨re dâusine et rÃ©duit la prÃ©-course, la course globale de la gÃ¢chette et la rÃ©initialisation de la gÃ¢chette, offre une absorption et une rÃ©initialisation en douceur tout en offrant une pause de gÃ¢chette nette. RÃ©sultats attendus : Remplacement direct de la gÃ¢chette en polymÃ¨re dâusine Lisse lâabsorption et la rÃ©initialisation RÃ©duit la prÃ©-course de la gÃ¢chette, la course globale et la distance de rÃ©initialisation Rupture nette de la gÃ¢chette La sÃ©curitÃ© pivotante montÃ©e au centre maintient les valeurs de sÃ©curitÃ© dâusine GÃ¢chette uniquement NÃ©cessite lâutilisation de la barre de dÃ©clenchement Gen 3 dâorigine du client (et le retrait de la gÃ¢chette dâusine) ou lâinstallation sur une barre de dÃ©clenchement dâusine achetÃ©e sÃ©parÃ©ment (REMARQUE : Le retrait de la gÃ¢chette dâusine de la barre de dÃ©clenchement nÃ©cessite le remplacement de lâensemble complet pour le remettre en stock). Ne pas utiliser avec la barre de dÃ©clenchement Gen 4 ou les Glocks Gen 5

Plus...

The Apex Tactical Action Enhancement Trigger for Glock® is a direct drop-in replacement of the factory polymer trigger and reduces pre-travel, overall trigger travel, and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break. Expected Results: Direct drop-in replacement of factory polymer trigger Smooths uptake and reset Reduces trigger pre-travel, overall travel, and reset distance Crisp trigger break Center mounted pivoting safety maintains factory safety values Trigger Only Requires use of customer’s stock Gen 3 trigger bar(and removal of factory trigger) or installation on separately purchased factory trigger bar (NOTE: removing the factory trigger from the trigger bar requires replacement of the complete assembly to go back to stock). Not for use with Gen 4 trigger bar or Gen 5 Glocks

Plus...

Évaluations client de APEX TACTICAL SPECIALTIES INC ACTION ENCHANCEMENT TRIGGER W/GEN 3 TRIGGER BAR FOR GLOCK®

Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 3,2

you won't be disappointed (01/11/2015)

One issue I have had with my Glocks compared to my other pistols is the amount of free trigger and trigger reset.I have already stoned all my trigger components so I had a constant trigger break already. I knew the Apex trigger would be waiting when I got home from work. So I garbed the package kissed my my wife and headed to the bench as soon as I walked in the door. God bless Glock, in less than five minutes I was done with the swap. There at the bench I could already feel the improvement in the free trigger and trigger rest. But the next day at the range it was like shooting a different gun. I have recommended the Apex trigger all my Glock owning friends.For the money and the time, you won't be disappointed.

NOT Safe! (07/02/2016)

I received one of these triggers as a gift and once I had it installed, I tested the function and realized that the trigger safety does not properly re-engage once the shooter's finger is removed from the trigger (i.e. if you are using a "ride the reset" method, or if you even put your finger on, then off the trigger, the trigger will then allow firing without touching the trigger safety) I exchanged it for another thinking the first one was just a lemon. The safety on the second trigger properly engages about half the time, which is still not an acceptable level of safety. As such, I can't use it or recommend it and thought others should be aware of this potential issue.

I decided to go with a different trigger altogether, which is a shame because I liked the straight profile of this APEX trigger.

Very Nice (11/02/2016)

I had no problems with the safety and tried to duplicate the problems of others and could not. Trigger has a very nice feel, take up is smooth and travel is less. Expensive but worth it for me as I hated the serrated trigger.

Apex Triiger & Bar fo Gen3 Glock 17 & 19 (28/04/2016)

This Apex unit reduces take-up travel and maintains the stock post-travel. It worked as the original parts did in my 17.

Dropping into the 19 frame, the pistol failed to reset after pressing the trigger. Replacing with stock parts and it functioned normally.

I will leave this Apex in a reserve 17 for now.

Get the Dremel Ready (30/05/2016)

The short version of a long story. I installed this in about a dozen different gen 3 pistols with existing polished trigger bars and 3.5 lb ghost connectors. Every pistol produced the same unimpressive result and I actually think it made the trigger pulls worse.

I attacked the trigger bar with the Dremel and a little polish. Now it's as good as it was before. Not sure I noticed any significant difference in the pre or over travel. However, the trigger pad does feel better than the stock ridged trigger of the Glock 19 or Glock 26.

It's ok (02/07/2016)

Pros

- Very Easy to install

- Much for comfortable than the stock trigger

- Reduced take up

- Do not have the safety issue mentioned in another review. (I would question of it was installed properly)

Con

- Did not resolve the main reason I upgraded my Glock trigger (Spongy Break)

I have been a long time M&P shooter and APEX did a fantastic job with their M&P trigger kit. I have installed them in my Full Size and Shield which is my summer time EDC pistol . I decided to move to a Glock 19 for fall/winter/spring EDC for added capacity and went with APEX tigger due to my past experience. The trigger itself feels nice on the finger and is much more comfortable than the stock trigger. (Any Glock shooter that has shot over 300 rounds in a single session knows the stock trigger leaves your finger a bit raw) The take up is reduced as well which is not such a big deal to me. What I was really hoping for was a crisp break which I did not get. The APEX trigger is still spongy which is disappointing and the main reason I upgraded from the stock trigger. I did opt to purchase the ULTIMATE SAFETY PLUNGER as recommended by APEX which I did test with and without. The plunger does make a difference and smoothed out the take up compared to the stock plunger.

So if you are looking to get a more comfortable trigger and/or reduce take up this is a great option. If you are looking to crisp up the break I would suggest looking at other offerings out there.

<img width="500" src='/userdocs/reviewimages/9b3d738e-6359-4d47-94d0-fa0e89bba801.jpg' alt=''>

It's OK (01/08/2016)

They sent it to me for my gen 4 Glock but the box specifically says its for the gen 3. After installation, one of the roll pins continues to come out. It could be way way better. Their M&P trigger is outstanding. This one is way below average IMHO

Very Dissapointed (22/01/2017)

I have used several Apex triggers in M&Ps with excellent results, so I naturally had to try one for my Gen 3 Glock 17. It installed just how a Glock trigger should, easy and instant but had several failures to reset. I did notice the safety tab was making more contact with the frame than usual so I removed some metal from the rear for better clearance. Problem solved or so I thought, the failure to reset was actually because the striker was slipping off of the trigger bar upon the slide return. Replaced the factory trigger and bar, problem solved. Just to make sure, I tried it in my Gen 3 19 and same result. This piece will definitely be sent back, I'd much rather spend a little more for a ZEV or Agency Arms and know my trigger will reset each and every time.

I own four! (12/01/2018)

I bought one, polished it with Flitz and a dremel, installed in my G19 (gen 4) with a Ghost 3.5lbs connector and went to the range. My finger felt so much better after 500 rounds and my accuracy was the best it has ever been. I purchased three more for every Glock I own. I can not shoot a factory Glock trigger anymore. These are worth their weight in gold.

Lire 9 plus d'avis sur brownells.com

164.9 174.9 3 EUR

Référence: 100018172
APEX TACTICAL SPECIALTIES INC ACTION ENCHANCEMENT TRIGGER W/GEN 3 TRIGGER BAR FOR GLOCK®
Ref Fabricant: 102-110 856008005611 La gÃ¢chette dâamÃ©lioration de lâaction tactique Apex pour GlockÂ® est un remplacement direct de la gÃ¢chette en polymÃ¨re dâusine et rÃ©duit la prÃ©-course, la course globale de la gÃ¢chette et la rÃ©initialisation de la gÃ¢chette, offre une absorption et une rÃ©initialisation en douceur tout en offrant une pause de gÃ¢chette nette. RÃ©sultats attendus : Remplacement direct de la gÃ¢chette en polymÃ¨re dâusine Lisse lâabsorption et la rÃ©initialisation RÃ©duit la prÃ©-course de la gÃ¢chette, la course globale et la distance de rÃ©initialisation Rupture nette de la gÃ¢chette La sÃ©curitÃ© pivotante montÃ©e au centre maintient les valeurs de sÃ©curitÃ© dâusine GÃ¢chette uniquement NÃ©cessite lâutilisation de la barre de dÃ©clenchement Gen 3 dâorigine du client (et le retrait de la gÃ¢chette dâusine) ou lâinstallation sur une barre de dÃ©clenchement dâusine achetÃ©e sÃ©parÃ©ment (REMARQUE : Le retrait de la gÃ¢chette dâusine de la barre de dÃ©clenchement nÃ©cessite le remplacement de lâensemble complet pour le remettre en stock). Ne pas utiliser avec la barre de dÃ©clenchement Gen 4 ou les Glocks Gen 5

164.9 EUR 1 164,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: Glock Finition: Noir Modèle: 37, 39, 17, 17L, 19, 22, 23, 24, 34, 35, 26, 27, 31, 32, 33, 38 Style: Plat

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Fabrication: Glock Finition: Noir Modèle: 37,39,17,17L,19,22,23,24,34,35,26,27,31,32,33,38 Style: Plat Poids du colis: 0,045kg Hauteur d'expédition: 25mm Largeur d'expédition: 89mm Longueur d'expédition: 140mm UPC : 856008005611

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c

Opérateur économique responsable conformément au règlement de l'UE

Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr

Référence: 100023505
APEX TACTICAL SPECIALTIES INC ACT ENHNCMNT TRIGGER W/GEN 3 TRIGGER BAR FOR GLOCK-PURPLE
Ref Fabricant: 102-160 854263007067 La gÃ¢chette dâamÃ©lioration de lâaction tactique Apex pour GlockÂ® est un remplacement direct de la gÃ¢chette en polymÃ¨re dâusine et rÃ©duit la prÃ©-course, la course globale de la gÃ¢chette et la rÃ©initialisation de la gÃ¢chette, offre une absorption et une rÃ©initialisation en douceur tout en offrant une pause de gÃ¢chette nette. RÃ©sultats attendus : Remplacement direct de la gÃ¢chette en polymÃ¨re dâusine Lisse lâabsorption et la rÃ©initialisation RÃ©duit la prÃ©-course de la gÃ¢chette, la course globale et la distance de rÃ©initialisation Rupture nette de la gÃ¢chette La sÃ©curitÃ© pivotante montÃ©e au centre maintient les valeurs de sÃ©curitÃ© dâusine GÃ¢chette uniquement NÃ©cessite lâutilisation de la barre de dÃ©clenchement Gen 3 dâorigine du client (et le retrait de la gÃ¢chette dâusine) ou lâinstallation sur une barre de dÃ©clenchement dâusine achetÃ©e sÃ©parÃ©ment (REMARQUE : Le retrait de la gÃ¢chette dâusine de la barre de dÃ©clenchement nÃ©cessite le remplacement de lâensemble complet pour le remettre en stock). Ne pas utiliser avec la barre de dÃ©clenchement Gen 4 ou les Glocks Gen 5

174.9 EUR 10 174,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: Glock Finition: Purple Modèle: 37, 39, 17, 17L, 19, 22, 23, 24, 34, 35, 26, 27, 31, 32, 33, 38 Style: Compétition, Amelioré

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Référence: 100025319
APEX TACTICAL SPECIALTIES INC ACT ENHANCEMENT TRIGGER W/GEN 3 TRIGGER BAR FOR GLOCK-BLUE
Ref Fabricant: 102-170 854263007333 La gÃ¢chette dâamÃ©lioration de lâaction tactique Apex pour GlockÂ® est un remplacement direct de la gÃ¢chette en polymÃ¨re dâusine et rÃ©duit la prÃ©-course, la course globale de la gÃ¢chette et la rÃ©initialisation de la gÃ¢chette, offre une absorption et une rÃ©initialisation en douceur tout en offrant une pause de gÃ¢chette nette. RÃ©sultats attendus : Remplacement direct de la gÃ¢chette en polymÃ¨re dâusine Lisse lâabsorption et la rÃ©initialisation RÃ©duit la prÃ©-course de la gÃ¢chette, la course globale et la distance de rÃ©initialisation Rupture nette de la gÃ¢chette La sÃ©curitÃ© pivotante montÃ©e au centre maintient les valeurs de sÃ©curitÃ© dâusine GÃ¢chette uniquement NÃ©cessite lâutilisation de la barre de dÃ©clenchement Gen 3 dâorigine du client (et le retrait de la gÃ¢chette dâusine) ou lâinstallation sur une barre de dÃ©clenchement dâusine achetÃ©e sÃ©parÃ©ment (REMARQUE : Le retrait de la gÃ¢chette dâusine de la barre de dÃ©clenchement nÃ©cessite le remplacement de lâensemble complet pour le remettre en stock). Ne pas utiliser avec la barre de dÃ©clenchement Gen 4 ou les Glocks Gen 5

174.9 EUR 6 174,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: Glock Finition: Blue Modèle: 37, 39, 17, 17L, 19, 22, 23, 24, 34, 35, 26, 27, 31, 32, 33, 38 Style: Compétition, Amelioré

Ajouter à la Liste d'Envies

Poser un question