SECURE FIREARM PRODUCTS
GOV'T LENGTH 1911 RECOIL SPRING TESTER

100011593

Le testeur de ressort de recul est un dispositif de test simple qui t'aide à mesurer rapidement la force de compression de n'importe quel ressort de recul de 1911 de longueur gouvernementale. Il te permet de vérifier facilement si le ressort de ton arme devient faible, et tu peux identifier le poids de n'importe quel ressort non marqué que tu pourrais avoir. Plus de soucis à propos d'endommager l'arme avec un ressort faible ou d'installer accidentellement un ressort trop souple quand tu veux tirer des munitions +P. Le testeur de ressort de recul est suffisamment compact pour être emporté au stand de tir ; il se glisse facilement dans une boîte à outils ou un sac de tir.

SPÉCIFICATIONS : Polymère dur avec composants en acier. Instructions incluses. Mesure des ressorts jusqu'à 26 lbs de poids de ressort. 2 piles AAA requises, non incluses.

Plus...

Recoil spring tester is a simple testing device that helps you quickly measure the compression strength of any Government-length 1911 recoil spring. Lets you easily check if your gun’s spring is getting weak, and you can identify the weight of any unmarked springs you may have lying around. No more worries about damaging the gun with a weak spring or accidentally installing a soft spring when you want to shoot +P ammunition. Recoil spring tester is compact enough to take to the range; fits easily in tool box or shooting bag.

SPECS: Hard polymer with steel components. Instructions included. Measures springs up to 26 lbs. spring weight. 2 AAA batteries which are required, are not included.

Plus...

Évaluations client de SECURE FIREARM PRODUCTS GOV'T LENGTH 1911 RECOIL SPRING TESTER

Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3,3

Don't waste your money (12/09/2013)

Tester is only good to measure gov't model recoil spring tensions. There is only 1 witness mark to show 1.625" compression on the tube.
Per Wolf Springs, spring commpression needs to be a mark at 1.625" for gov't models, another at 1.125" for commanders, and another at .700" for O.M.

If you try to use the current witness mark, a new 18# commander spring only weighs about 13#

Also the adapter is totaly useless. Instructions say test other springs (main / hammer springs) by pulling to current witness mark. The scale shows 6 brand new 23# hammer springs only weighing 12#

I called the manufacturer and explained the problems.
I'm returning my unit

This may explain better what I'm talking about.
http://www.calguns.net/calgunforum/showthread.php?t=204458&highlight=recoil+spring+tester

Great Product, Helped me alot (26/11/2013)

This was a great help in sorting out my springs. When I needed to test main springs I determined the proper compressed length and put a piece of tape on the barrel using the 1.625 line as a reference. Worked Great. I even tested some Govt. Recoil springs that were brand new and they tested within 1/2 lb. of where they were supposed to be.

I do understand that this is not a super precision spring checker and if a person needs that kind of accuracy then a high dollar spring tool can be purchased from an industrial supply house. However, they are very pricey and usually run more that the cost of a new gun.

Simple and works well (27/10/2015)

I tested all my 1911 recoil springs, including spares, and all of the springs for my friend's 1911s in about two hours, including disassembly and reassembly.

Easy to use, repeatable, and you can read spring compression within a tenth of a pound.

I would recommend this product for its intended use ... Government-length recoil springs.

Good idea... but... (05/09/2016)

Good idea !

Easy to use and to determine the length to be measure for each pistol.

I checked different kind of recoil springs and systematically had a difference of approximately two to three pounds (less) when compared with supposedly Wolff calibrated springs or manufacture calibrated springs.

IÂ´ll check (and/or change) the scale.

Lire 4 plus d'avis sur brownells.com

79.9 79.9 1 EUR

Référence: 100011593
SECURE FIREARM PRODUCTS GOV'T LENGTH 1911 RECOIL SPRING TESTER
Ref Fabricant: 11490-SR-D Le testeur de ressort de recul est un dispositif de test simple qui t'aide à mesurer rapidement la force de compression de n'importe quel ressort de recul de 1911 de longueur gouvernementale. Il te permet de vérifier facilement si le ressort de ton arme devient faible, et tu peux identifier le poids de n'importe quel ressort non marqué que tu pourrais avoir. Plus de soucis à propos d'endommager l'arme avec un ressort faible ou d'installer accidentellement un ressort trop souple quand tu veux tirer des munitions +P. Le testeur de ressort de recul est suffisamment compact pour être emporté au stand de tir ; il se glisse facilement dans une boîte à outils ou un sac de tir.

79.9 EUR 3 79,90 € *

Délai de livraison environ 14-21 jours.

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Mesure facilement la force de compression des ressorts de rappel pour 1911.
Compact et facile à transporter au stand de tir.
Instructions incluses et mesure jusqu'à 26 lbs de poids de ressort.

Caractéristiques

Poids du colis: 0,181kg Hauteur d'expédition: 25mm Largeur d'expédition: 135mm Longueur d'expédition: 254mm

Détails de l'article

Fabriqué au USA

Testez facilement la force de vos ressorts 1911 avec notre testeur compact 🔧. Évitez les soucis de sécurité au stand de tir !

SPÉCIFICATIONS : Polymère dur avec composants en acier. Instructions incluses. Mesure des ressorts jusqu'à 26 lbs de poids de ressort. 2 piles AAA requises, non incluses.

Plus...

SPECS: Hard polymer with steel components. Instructions included. Measures springs up to 26 lbs. spring weight. 2 AAA batteries which are required, are not included.

Plus...