BROWNELLS
RAPID ROD

002110000

Tige pliable facile à transporter sur le terrain ; dégage rapidement les obstructions

Des tubes en aluminium segmentés avec un câble en acier inoxydable interne s'assemblent rapidement en une tige de nettoyage rigide pour une utilisation d'urgence sur le terrain. Se replie en un paquet compact de seulement 5" de long. Un indispensable pour déloger la neige, la glace, la boue et d'autres obstructions dans le canon que tu pourrais rencontrer lors de tes sorties de chasse en pleine nature. Pratique également pour desserrer des douilles coincées, des cartouches de fusil de chasse ou des bourres. S'adapte aux canons de .22 à .54 calibre jusqu'à 26" de long, canons de fusil de chasse de 20 à 10 gauge jusqu'à 32" de long ; ainsi que des canons de .410 et 28 gauge jusqu'à 26" de long. Poignée striée avec arbre de réglage de tension qui tire le câble pour verrouiller les segments de la tige en place. Comprend une boucle pour patch en plastique (.22 calibre), cinq jags en aluminium (.22 à .54 calibre), et un étui de transport en nylon avec boucle de ceinture.

SPECS : Aluminium, finition naturelle avec câble en acier inoxydable tressé. Filetage femelle 8-32 tpi. Longueur totale - 39" (99cm). Section de la tige - 26" (66cm) de long x .21" (5.3mm) de diamètre. Poignée - 7" (17.8cm) de long x ½" (1.3cm) de diamètre. Poids de 2 oz. (56.7g). Comprend une boucle en plastique, (5) jags, et un étui de transport.

Plus...

Collapsible Rod Carries Easily In The Field; Clears Obstruction Fast

Segmented aluminum tubing with internal stainless steel cable assemble quickly into a rigid cleaning rod for emergency field use. Collapses into a compact package only 5" long. A must-have for dislodging snow, ice, mud and other bore obstructions you could encounter on remote hunting trips. Also comes in handy for loosening stuck cases, shotgun shells or wads. Fits .22 to .54 caliber barrels up to 26" long, 20 to 10 gauge shotgun barrels up to 32" long; plus .410 and 28 gauge barrels up to 26" long. Knurled handle with tension adjustment shaft draws cable tight to lock rod segments in place. Includes a plastic patch loop (.22 caliber), five aluminum jags (.22 to .54 caliber), and nylon carry case with belt loop.

SPECS: Aluminum, natural finish with stainless steel braided cable. 8-32 tpi female thread. OAL - 39" (99cm). Rod Section - 26" (66cm) long x .21" (5.3mm) diameter. Handle - 7" (17.8cm) long x ½" (1.3cm) dia. 2 oz. (56.7g) wt. Includes plastic loop, (5) jags, and carry case.

Plus...

Évaluations client de BROWNELLS RAPID ROD

Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3,5

Cool 'takedown' cleaning rod (15/01/2010)

Looking for a take along lightweight 'takedown' cleaning rod, and this is a pretty good solution. It is a 'shock-corded' sytem rod, that packs into a little cordura case, about the size of a typical folding knife case--handy! You twist the handle counterclockwise, and it draws the 'shock-cord' tight and you have a rigid rod system. I was motivated to find a prodcuct like this due to a friend sticking a fired case in his rifle at the field sight in, and it was a real pain getting his rig back up to speed. If we had a rod like this with us, it would have just taken a few seconds to get him going again--a boresnake ain't gonna cut it for dislodging a case or clearing your bore of something like snow or mud either...
The only two things I can think of that could be an issue, are that you could have a longer barreled rig, and this might not be long enough, and it doesn't rotate, like a good cleaning rod with ball bearings, having said that, this is just supposed to be a field expedient solution, and I like it a lot. Not sure how durable it will be, but I think it will be pretty decent for the occassional use it will see. I'm gonna get a few more, and give one friend in particular one as a gift! Lightweight and simple, good quality, would like to find a rotating tip like the Birchwood Casey multi-piece rod has--kind of cool.

Rapid Rod (21/04/2011)

I spend many days wing shooting and have toyed with the idea of carrying an old 3 pc .22 rod just incase I would need to dislodge a wad (happened at trap/skeet range) or to clear a shell/dirt/etc. A couple years ago my dad took a bore snake on a pack in hunt in Wyoming but knew that wasn't gonna be the MacGyver tool. Last December on the closing day of duck season it happened... The plastic hull seperated at the brass and became lodge in my forcing cone when a flock of ring-necks roared thru our spread. The shell sounded funny so I held off on the third shot (fortunately). Examining the aftermath I had to disassemble my gun to confirm the hull was still in the barrel. Needless to say birds were flying an my buddies weren't eager to go home (nor was I). Tried a stick (nope), finger (nope), pocket knife in a granola wrapper (nope), oh a stray piece of rebar with a candy bar wrapper (now your cookin' with gas)! It was not one of my finer moments sliding a rusty piece of metal down a $1,000+ shotgun barrel - but I was back in business. While I will likely never have to use it, atleast I can now elect to oil my bore on multi-day trips.

I rated it a 4 because the rod has a little flex which could drag on rifling (but this could be explained because I haven't reefed on the theads to tighten it too much) and the package lacked deployment direcitons. Other than that I would give it a 5/5 for an emergency field tool.

Heck it may even serve a an emergency magazine plug??? for those folks who don't assemble their new guns with the factory plug (you know who you are as I have met many in the Indiana Dove Fields...).

not important until you need it (05/12/2013)

I bought this tool at the last minute before heading to a guided elk hunt in colorado. on the third day, I dropped my gun in the mud and filled the end of the barrel with mud. Thankfully i had this rod. by cutting a piece of shirt off to use as a pad, I was able to clean out the mud and then shot a nice bull that afternoon. I haven't had any problems with the rod being too flexible once I tightened the handle down.

In the future, I will be storing a brass brush and a few patches in the case with the rod so I have what I need rather than cutting my shirt next time.

All in all I think this is a great product that every hunter should carry with them. Its light and and the one time you need it, you will be happy you have it.

Terrible (05/06/2014)

This product seemed like a good idea at the time given the reviews. In fact the first time I received this I assembled it and it seemed fine.
The second time I assembled it it broke right at the crimp in the handle before I could actually use it. Not a good design.

Lire 4 plus d'avis sur brownells.com

32.9 32.9 1 EUR

Référence: 002110000
BROWNELLS RAPID ROD
Ref Fabricant: 1100USA Des tubes en aluminium segmentés avec un câble en acier inoxydable interne s'assemblent rapidement en une tige de nettoyage rigide pour une utilisation d'urgence sur le terrain. Se replie en un paquet compact de seulement 5" de long. Un indispensable pour déloger la neige, la glace, la boue et d'autres obstructions dans le canon que tu pourrais rencontrer lors de tes sorties de chasse en pleine nature. Pratique également pour desserrer des douilles coincées, des cartouches de fusil de chasse ou des bourres. S'adapte aux canons de .22 à .54 calibre jusqu'à 26" de long, canons de fusil de chasse de 20 à 10 gauge jusqu'à 32" de long ; ainsi que des canons de .410 et 28 gauge jusqu'à 26" de long. Poignée striée avec arbre de réglage de tension qui tire le câble pour verrouiller les segments de la tige en place. Comprend une boucle pour patch en plastique (.22 calibre), cinq jags en aluminium (.22 à .54 calibre), et un étui de transport en nylon avec boucle de ceinture.

32.9 EUR 0 32,90 € *

Avertir lorsque l'article est disponible

Pas disponible.

Caractéristiques: Calibre: .410 Bore, 20 Gauge, 16 Gauge, 12 Gauge, 10 Gauge Matériau: Aluminum Style: Pistolet, Carabine, Fusil de Chasse

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Des tubes en aluminium segmentés se combinent rapidement pour créer une tige de nettoyage rigide, idéale pour des situations d'urgence sur le terrain.
Compact et léger, il se replie à seulement 5" de long et convient à divers calibres de canons allant de .22 à .54.
Comprend une boucle de patch, cinq jags en aluminium et un étui de transport en nylon, parfait pour le rangement et la portabilité.

Caractéristiques

Calibre: .410 Bore,20 Gauge,16 Gauge,12 Gauge,10 Gauge Matériau: Aluminum Style: Pistolet,Carabine,Fusil de Chasse Poids du colis: 0,045kg Hauteur d'expédition: 25mm Largeur d'expédition: 64mm Longueur d'expédition: 150mm