Le modèle de compétition BR-30 de mesure de poudre est vraiment un modèle de compétition avec des caractéristiques très spéciales. L'une de ces caractéristiques (le tambour et le micromètre) limite la plage de chargement globale d'un minimum de 10 grains (en fonction de la densité de la poudre) à un maximum d'environ 50 grains. Si tu es un tireur compétitif sérieux et que tes besoins en chargement se situent généralement entre 10 et 50 grains, c'est certainement la mesure à choisir. Cette mesure utilise toutes les fonctionnalités prouvées en compétition du modèle de qualité Match-Grade 3BR. Pour obtenir la mesure de poudre la plus uniforme possible pour la compétition Benchrest, avec un poids de charge ciblé d'environ 30 grains, (d'où le nom BR-30), un tout nouveau tambour et unité de mesure ont été créés. Le diamètre de la cavité de mesure a été réduit et le piston de mesure a été doté d'une forme hémisphérique unique ou en "cup". Cette forme crée une cavité à poudre qui ressemble au fond d'un tube à essai pour atténuer le tassement irrégulier de la poudre et améliorer l'uniformité de charge à charge. Une poignée de fonctionnement spéciale a également été créée pour ce modèle. C'est une poignée rotative, légèrement plus lourde pour t'aider à maintenir un mouvement plus uniforme.
Plus...
The Competition Model BR-30 Powder Measure is truly a competition model with some very special features. One of these features (the drum and micrometer) limits the overall charging range from a low of 10 grains (dependent upon powder density) to a maximum of approximately 50 grains. If you are a serious competitive shooter and your loading requirements are generally between 10 and 50 grains, this is certainly the measure to choose. This measure uses all of the competition proven features of the Match-Grade Model 3BR. To acheive the most uniform powder metering possible for Benchrest Competition, at a targeted charge weight of approximately 30 grains, (hence the name BR-30) an entirely new drum and metering unit was created. The diameter of the metering cavity was reduced and the metering plunger was given a unique hemespherical or "cup" shape. This shape creates a powder cavity that resembles the bottom of a test tube to alleviate irregular powder settling and to enhance charge to charge uniformity. A special operating handle was also created for this model. It's a rotating handle, slightly heavier to help you maintain a more uniform stroke.
Plus...
Évaluations client de REDDING BR-30 COMP MEASURE
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4,8
Consistent-Repeatable(16/02/2011)
I have had this measure for many years and am still amazed with how accurate, consistent and how repeatable the settings are. It is made in a very sturdy manner. The only plastic is the hopper and the hopper lid. Everything else is precision machined metal. This measure has outperformed my other measures and will outlast them too. It throws accurate loads very quickly. I have it installed on a turret press and also mount it on my reloading bench when using my single stage press. I load .38 super through .50 BMG with it. I do not hesitate to recommend this product to anyone looking for a well made, fast and accurate throwing powder measure.
BR-30 Review(28/10/2011)
I have just purchased a BR-30 powder thrower to replace the old thrower that I have been using. It performs very well with fine powders but still leaves a little to be desired with course log powders. I have found that "locking" the micrometer is essential to prevent changes. It does allow fine adjustments and these work very well with many powders. I would recommend this thrower as a medium priced quality thrower. It is easy to duplicate different loads for different cases.
Spot on accuracy and easy to use(18/08/2014)
My son the gunsmith got this for me for Christmas three years ago and I've used it ever since on my T-7 Redding turret press. Mounting it on the press was no problem, and I can really crank out the ammo...which was his ulterior motive, so I can keep him supplied! The pistol insert is spot-on accurate, and it makes me smile to move it 10 clicks to get exactly 1 grain more or less powder. I try to use ball powders for easy flow, but it works fine on stick powders like Varget. I load a lot of 44-40 with Trail Boss, which will bridge if you're not careful, but a couple of taps of the handle usually drops it. I'm careful to check each round for a full load before seating the bullet over Trail Boss, however. Check the set screws from time to time so they stay tight, and you'll find that weighing the charge every 5 or 10 rounds will give you a lot of confidence in this fine device.
Great equipment(09/03/2016)
This is a great pice of equipment I set up for many different rounds and powders. I will say some powers run through better that others but are accurate just the same. I do run about 20 pulls of what ever powder Im using through it before I start my adjustments and if you keep a log you will find the you can just dial it in pull 20 times and your right where you want to be, In short I have one for my riffle loads and one for my pistol loads & have been using them for three years now. You will enjoy using this powder drop and if not let me know I buy it off you! for a 40 % savings of corse.
Référence: 749008141 REDDING BR-30 COMP MEASURE Ref Fabricant: 03300611760033001 Le modèle de compétition BR-30 de mesure de poudre est vraiment un modèle de compétition avec des caractéristiques très spéciales. L'une de ces caractéristiques (le tambour et le micromètre) limite la plage de chargement globale d'un minimum de 10 grains (en fonction de la densité de la poudre) à un maximum d'environ 50 grains. Si tu es un tireur compétitif sérieux et que tes besoins en chargement se situent généralement entre 10 et 50 grains, c'est certainement la mesure à choisir. Cette mesure utilise toutes les fonctionnalités prouvées en compétition du modèle de qualité Match-Grade 3BR. Pour obtenir la mesure de poudre la plus uniforme possible pour la compétition Benchrest, avec un poids de charge ciblé d'environ 30 grains, (d'où le nom BR-30), un tout nouveau tambour et unité de mesure ont été créés. Le diamètre de la cavité de mesure a été réduit et le piston de mesure a été doté d'une forme hémisphérique unique ou en "cup". Cette forme crée une cavité à poudre qui ressemble au fond d'un tube à essai pour atténuer le tassement irrégulier de la poudre et améliorer l'uniformité de charge à charge. Une poignée de fonctionnement spéciale a également été créée pour ce modèle. C'est une poignée rotative, légèrement plus lourde pour t'aider à maintenir un mouvement plus uniforme.
Le modèle de compétition BR-30 de mesure de poudre est vraiment un modèle de compétition avec des caractéristiques très spéciales. L'une de ces caractéristiques (le tambour et le micromètre) limite la plage de chargement globale d'un minimum de 10 grains (en fonction de la densité de la poudre) à un maximum d'environ 50 grains. Si tu es un tireur compétitif sérieux et que tes besoins en chargement se situent généralement entre 10 et 50 grains, c'est certainement la mesure à choisir. Cette mesure utilise toutes les fonctionnalités prouvées en compétition du modèle de qualité Match-Grade 3BR. Pour obtenir la mesure de poudre la plus uniforme possible pour la compétition Benchrest, avec un poids de charge ciblé d'environ 30 grains, (d'où le nom BR-30), un tout nouveau tambour et unité de mesure ont été créés. Le diamètre de la cavité de mesure a été réduit et le piston de mesure a été doté d'une forme hémisphérique unique ou en "cup". Cette forme crée une cavité à poudre qui ressemble au fond d'un tube à essai pour atténuer le tassement irrégulier de la poudre et améliorer l'uniformité de charge à charge. Une poignée de fonctionnement spéciale a également été créée pour ce modèle. C'est une poignée rotative, légèrement plus lourde pour t'aider à maintenir un mouvement plus uniforme.
Plus...
The Competition Model BR-30 Powder Measure is truly a competition model with some very special features. One of these features (the drum and micrometer) limits the overall charging range from a low of 10 grains (dependent upon powder density) to a maximum of approximately 50 grains. If you are a serious competitive shooter and your loading requirements are generally between 10 and 50 grains, this is certainly the measure to choose. This measure uses all of the competition proven features of the Match-Grade Model 3BR. To acheive the most uniform powder metering possible for Benchrest Competition, at a targeted charge weight of approximately 30 grains, (hence the name BR-30) an entirely new drum and metering unit was created. The diameter of the metering cavity was reduced and the metering plunger was given a unique hemespherical or "cup" shape. This shape creates a powder cavity that resembles the bottom of a test tube to alleviate irregular powder settling and to enhance charge to charge uniformity. A special operating handle was also created for this model. It's a rotating handle, slightly heavier to help you maintain a more uniform stroke.
Plus...
Évaluations client de REDDING BR-30 COMP MEASURE
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4,8
Consistent-Repeatable(16/02/2011)
I have had this measure for many years and am still amazed with how accurate, consistent and how repeatable the settings are. It is made in a very sturdy manner. The only plastic is the hopper and the hopper lid. Everything else is precision machined metal. This measure has outperformed my other measures and will outlast them too. It throws accurate loads very quickly. I have it installed on a turret press and also mount it on my reloading bench when using my single stage press. I load .38 super through .50 BMG with it. I do not hesitate to recommend this product to anyone looking for a well made, fast and accurate throwing powder measure.
BR-30 Review(28/10/2011)
I have just purchased a BR-30 powder thrower to replace the old thrower that I have been using. It performs very well with fine powders but still leaves a little to be desired with course log powders. I have found that "locking" the micrometer is essential to prevent changes. It does allow fine adjustments and these work very well with many powders. I would recommend this thrower as a medium priced quality thrower. It is easy to duplicate different loads for different cases.
Spot on accuracy and easy to use(18/08/2014)
My son the gunsmith got this for me for Christmas three years ago and I've used it ever since on my T-7 Redding turret press. Mounting it on the press was no problem, and I can really crank out the ammo...which was his ulterior motive, so I can keep him supplied! The pistol insert is spot-on accurate, and it makes me smile to move it 10 clicks to get exactly 1 grain more or less powder. I try to use ball powders for easy flow, but it works fine on stick powders like Varget. I load a lot of 44-40 with Trail Boss, which will bridge if you're not careful, but a couple of taps of the handle usually drops it. I'm careful to check each round for a full load before seating the bullet over Trail Boss, however. Check the set screws from time to time so they stay tight, and you'll find that weighing the charge every 5 or 10 rounds will give you a lot of confidence in this fine device.
Great equipment(09/03/2016)
This is a great pice of equipment I set up for many different rounds and powders. I will say some powers run through better that others but are accurate just the same. I do run about 20 pulls of what ever powder Im using through it before I start my adjustments and if you keep a log you will find the you can just dial it in pull 20 times and your right where you want to be, In short I have one for my riffle loads and one for my pistol loads & have been using them for three years now. You will enjoy using this powder drop and if not let me know I buy it off you! for a 40 % savings of corse.