Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

WILSON COMBAT
1911 RECOIL SPRING GUIDE

874218000356 965148500

Éliminez le pli et le blocage du ressort ; Styles en un et deux pièces

Avec un guide rod de pleine longueur en place, offrant aucune chance de blocage du ressort de recul, un 1911 chambrera, cyclera et extraira plus fiablement. Style monobloc disponible pour les modèles Government/Gold Cup et Commander ; modèle en deux pièces pour les Government/Gold Cup en version standard pleine longueur et long slide pour les pistolets équipés de compensateurs partiels ou complets. Le modèle Reverse Plug s'adapte aux glissières de longueur Govt. modifiées pour accepter un écrou de douille conique. Ceux-ci sont uniquement pour des ressorts de recul standard, pas pour des Flat Wire Springs.

SPÉCIFICATIONS : Acier inoxydable. Axe de diamètre .325" (8,25 mm). Tous incluent le bon bouchon.

Plus...

Eliminate Spring Kink & Bind; One-& Two-Piece Styles

With a full-length guide rod in place giving no chance for recoil spring bind, a 1911 will chamber, cycle and extract more reliably. One-piece style available for Government/Gold Cup and Commander; Two-piece for Government/Gold Cup in both standard full-length and long slide for pistols equipped with partial or full-style compensators. Reverse Plug model fits Govt. length slides altered to accept tapered sleeve bushing. These are for standard recoil springs only, not Flat Wire Springs.

SPECS: Stainless steel. .325" (8.25mm) diameter shaft. All include correct plug.

Plus...

Évaluations client de WILSON COMBAT 2-PIECE GOVERNMENT GUIDE ROD

Nombre d'évaluations: 22
De brownells.com: 22
Note moyenne: 4,6

Good gear (07/03/2013)

Great for any use: Leo, mil, self defense and competition
Easy to install and easier to take gun apart
I have nothing negative to say about this product

Very Well Made (03/05/2013)

Nice quality stainless 2 piece guide rod. Installed it into my Colt Gold Cup Trophy with a Wilson Combat Shok Buffer. Love the look when the slide is locked back and easy to take apart. I've never had one come apart on me and have bought one for every 1911 I've owned.

Remington 1911 R1 (11/10/2015)

I bought this guide rod for my Remington 1911 R1 and it fit perfectly without fitting. The rod is machined so well that when the two pieces are screwed together, it could be mistaken for a one-piece. I also like the added weight to the pistol - it should help reduce her muzzle flip.

The only thing I would change is the fact that it isn't polished and therefore doesn't quite match the barrel and bushing. Not a big deal though - I'm gonna try to polish it myself.

Excellent Part (11/02/2011)

Purchased one piece guide rod for a custom commander build in 400 corbon. The rod come supplied with plug. Overall fantastic fit and finish. Very strong and worked flawlessly with a Wolf 20# extra power spring. Only negative was the muzzle end of the rod looked like it cut off from a govt. length unit. Fine machining marks were visible but cleaned up easily with 400/800 grit paper. Overall, very impressive part for the money, with only the smallest issue keeping it from a 5 rating.

TOO LONG (18/08/2012)

Nice well made piece of work, but it was too long . Had to take about .05" off the end so that the barrel collar could move past it to seat the spring plug. For [$] I would expect better from Wilson

Great Addition (15/06/2013)

Simple, effective, and inexpensive. There is really no reason not to use this product. It dropped right in, makes cycling the gun smoother, adds a little extra weight up front for minor recoil reduction, and I think it looks good.

Thank God for the reviews on Brownells (11/06/2014)

This guide rod is exactly what I needed. I have an ATI 1911 Commander G.I. Enhanced model, and from reading the reviews, I believed this would work, though I might need to fit it. I did not understand exactly what the reviewers meant by needing to grind/file the length of the rod, until I tried to install mine. Thankfully, the folks that reviewed this item game me enough info. to sort of know what was needed to be done, or I'd have been left cursing my bad luck. Thanks Brownells and the other reviewers as well. This item works perfectly, you just need to shorten it and the spring cap on a grinder and then finish file and sand it to a perfect finish. That is not the product's fault, it is the ATI 1911's fault, it is a little different than other firearms, evidently.

Not a fit for the ATI Firepwr Xtrme GI (27/08/2014)

I gave this item a middle of the road grade. Finnish was above par, fit was well below par. This is supposed to fit a Commander, my gun barrel measured from below the shroud to the end of the barrel is 4 !/4"; the guide rod is about 1/8-3/16" too long and the spring cap will need grinding also for the bushing to clear. Maybe it's just ATI's wackey measurements compared to other Commanders but this is unacceptable. I can use a file a bit and I do when installing a trigger or something else that's needs just a bit of stoning maybe but removing enough metal requiring a grinder is not good. I'm gonna have to ask for an RMA/refund for this piece.

Great quality as always (11/09/2015)

I put this in my Sig 1911 tacops carry. This FLGR definitely made the accuracy way better. Would even be better if the come blued.

Excellent machining (08/02/2011)

Used in a Colt conversion kit buildup on new frame. Just be aware it's magnetic but a Precision blueing process would not work on it, acted like stainless.

Easy Upgrade (10/02/2011)

This was an easy to install upgrade for my Springfield GI. I love it!

easy upgrade (04/05/2011)

dropped right into my Remington 1911R1 no issues

great product (16/06/2011)

works great tightened up my gun made it shoot way better.

Love it (26/11/2011)

Got this for my SA 1911. Dropped right in with no fuss. Love the way it made the action smoother and tighter. Love it!

Improves accuracy (13/01/2012)

I bought one and soon after I bought a second for two of my SA 1911A1 Mil-Spec. (SS & Park.) Improved big time on tight groupings. Very easy to install. I had the two piece from SA before these. The Wilson spring guide and other parts is number one with me for the 1911A1. Semper Fi!

I like it (09/02/2012)

Seems to have taken up what little play there was in the slide/frame. Very nice piece. Only wish I could of got the plug in black as it stands out alittle on my Para GI Expert. But the barrel is also stainless so they match.

Great Product (12/02/2012)

I have bought 3 of these for different 45's over the years. You can actually feel how it smooths the slide cycle as soon as you install it and rack the slide. Once it is installed you can't feel the spring kinking and ketching when you rack the slide. I can't prove my guns cycle smoother during rapid fire but they certainly seems to. The added bonus is that you can remove the slide without removing the recoil spring.

One of the BEST add on piece to any 1911 (22/04/2012)

I put this in my COLT 1991 A1 it drop right in without any modication it also gave the gun a thghter slide to frame fit & tighter groups on paper if your looking for a way to inprove your slide to frame fit without spending a lot of money look no further it will also extend the life of your recoil spring

Worth the Money (12/01/2013)

I installed this in my Sig 1911 tactical with a Wilson 18 lb. recoil spring and added a recoil buffer it works great. Improved the accuracy and operation of the gun. I replaced the factory spring because it would not fit the guide rod. You will need the 1911 tool to remove and install the rod.

Wilson Guid Rod (11/03/2013)

Well seems to fit but the one I got the rod was really rough as well as the bushing so they did not slide smoothly against each other. Also milling in the plug would make the spring interfere with installing the mushing into the gun so sending it back to be exanged for another one to see if I get lucky.

SA 1911 Great fit (19/09/2013)

I got this for my SA Trophy Match 1911. Dropped right in with no issues. It made the action smoother and tighter and no more needing another tool for the field strip.

ParaOrdnance - Frankenstein (12/07/2014)

Used this guide rod in a high capacity 1911 built from a Para Ordnance POF45 frame kit. Fit was excellent and functions perfectly. This should help prevent recoil spring binding. It does make the pistol slightly harder to disassemble. However, with minimal practice I was able to disassemble without tools. Of course a bushing wrench does simplify disassembly.

Lire 22 plus d'avis sur brownells.com

54.9 64.9 4 EUR

Référence: 965148500
WILSON COMBAT 2-PIECE GOVERNMENT GUIDE ROD
Ref Fabricant: 148-5 874218000356 Avec un guide rod de pleine longueur en place, offrant aucune chance de blocage du ressort de recul, un 1911 chambrera, cyclera et extraira plus fiablement. Style monobloc disponible pour les modèles Government/Gold Cup et Commander ; modèle en deux pièces pour les Government/Gold Cup en version standard pleine longueur et long slide pour les pistolets équipés de compensateurs partiels ou complets. Le modèle Reverse Plug s'adapte aux glissières de longueur Govt. modifiées pour accepter un écrou de douille conique. Ceux-ci sont uniquement pour des ressorts de recul standard, pas pour des Flat Wire Springs.

54.9 EUR 0 54,90 € *

En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.

Caractéristiques: Fabrication: 1911 Modèle: Government

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Une tige-guide de ressort de rappel pleine longueur améliore la fiabilité de votre 1911.
Disponibles en modèles monobloc et deux pièces pour Government/Gold Cup et Commander.
Fabriqué en acier inoxydable avec un diamètre de tige de .325" (8,25mm).

Caractéristiques

Fabrication: 1911 Modèle: Government Poids du colis: 0,023kg Hauteur d'expédition: 10mm Largeur d'expédition: 81mm Longueur d'expédition: 175mm UPC : 874218000356

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Référence: 965025021
WILSON COMBAT 1-PIECE GOVERNMENT ROD WITH REVERSE PLUG
Ref Fabricant: 25RG 874218000547 Avec un guide rod de pleine longueur en place, offrant aucune chance de blocage du ressort de recul, un 1911 chambrera, cyclera et extraira plus fiablement. Style monobloc disponible pour les modèles Government/Gold Cup et Commander ; modèle en deux pièces pour les Government/Gold Cup en version standard pleine longueur et long slide pour les pistolets équipés de compensateurs partiels ou complets. Le modèle Reverse Plug s'adapte aux glissières de longueur Govt. modifiées pour accepter un écrou de douille conique. Ceux-ci sont uniquement pour des ressorts de recul standard, pas pour des Flat Wire Springs.

64.9 EUR 3 64,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: 1911 Modèle: Government

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Référence: 965025001
WILSON COMBAT 1-PIECE GOVERNMENT ROD
Ref Fabricant: 25G 874218000523 Avec un guide rod de pleine longueur en place, offrant aucune chance de blocage du ressort de recul, un 1911 chambrera, cyclera et extraira plus fiablement. Style monobloc disponible pour les modèles Government/Gold Cup et Commander ; modèle en deux pièces pour les Government/Gold Cup en version standard pleine longueur et long slide pour les pistolets équipés de compensateurs partiels ou complets. Le modèle Reverse Plug s'adapte aux glissières de longueur Govt. modifiées pour accepter un écrou de douille conique. Ceux-ci sont uniquement pour des ressorts de recul standard, pas pour des Flat Wire Springs.

54.9 EUR 0 54,90 € *

En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.

Caractéristiques: Fabrication: 1911 Modèle: Government

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Référence: 965025002
WILSON COMBAT 1-PIECE COMMANDER GUIDE ROD
Ref Fabricant: 25C 874218000493 Avec un guide rod de pleine longueur en place, offrant aucune chance de blocage du ressort de recul, un 1911 chambrera, cyclera et extraira plus fiablement. Style monobloc disponible pour les modèles Government/Gold Cup et Commander ; modèle en deux pièces pour les Government/Gold Cup en version standard pleine longueur et long slide pour les pistolets équipés de compensateurs partiels ou complets. Le modèle Reverse Plug s'adapte aux glissières de longueur Govt. modifiées pour accepter un écrou de douille conique. Ceux-ci sont uniquement pour des ressorts de recul standard, pas pour des Flat Wire Springs.

54.9 EUR 0 54,90 € *

En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.

Caractéristiques: Fabrication: 1911 Modèle: Commander

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Améliore ton 1911 avec le guide rod Wilson Combat. 🛠️ Fiabilité et performance optimales pour les modèles Government et Gold Cup.

Éliminez le pli et le blocage du ressort ; Styles en un et deux pièces

SPÉCIFICATIONS : Acier inoxydable. Axe de diamètre .325" (8,25 mm). Tous incluent le bon bouchon.

Plus...

Eliminate Spring Kink & Bind; One-& Two-Piece Styles

SPECS: Stainless steel. .325" (8.25mm) diameter shaft. All include correct plug.

Plus...

Évaluations client de WILSON COMBAT 2-PIECE GOVERNMENT GUIDE ROD

Nombre d'évaluations: 22
De brownells.com: 22
Note moyenne: 4,6

Good gear (07/03/2013)

Great for any use: Leo, mil, self defense and competition
Easy to install and easier to take gun apart
I have nothing negative to say about this product

Very Well Made (03/05/2013)

Remington 1911 R1 (11/10/2015)

Excellent Part (11/02/2011)

TOO LONG (18/08/2012)

Nice well made piece of work, but it was too long . Had to take about .05" off the end so that the barrel collar could move past it to seat the spring plug. For [$] I would expect better from Wilson

Great Addition (15/06/2013)

Thank God for the reviews on Brownells (11/06/2014)

Not a fit for the ATI Firepwr Xtrme GI (27/08/2014)

Great quality as always (11/09/2015)

I put this in my Sig 1911 tacops carry. This FLGR definitely made the accuracy way better. Would even be better if the come blued.

Excellent machining (08/02/2011)

Used in a Colt conversion kit buildup on new frame. Just be aware it's magnetic but a Precision blueing process would not work on it, acted like stainless.

Easy Upgrade (10/02/2011)

This was an easy to install upgrade for my Springfield GI. I love it!

easy upgrade (04/05/2011)

dropped right into my Remington 1911R1 no issues

great product (16/06/2011)

works great tightened up my gun made it shoot way better.

Love it (26/11/2011)

Got this for my SA 1911. Dropped right in with no fuss. Love the way it made the action smoother and tighter. Love it!

Improves accuracy (13/01/2012)

I like it (09/02/2012)

Great Product (12/02/2012)

One of the BEST add on piece to any 1911 (22/04/2012)

Worth the Money (12/01/2013)

Wilson Guid Rod (11/03/2013)

SA 1911 Great fit (19/09/2013)

I got this for my SA Trophy Match 1911. Dropped right in with no issues. It made the action smoother and tighter and no more needing another tool for the field strip.

ParaOrdnance - Frankenstein (12/07/2014)

Lire 22 plus d'avis sur brownells.com