Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

WILSON COMBAT
#321 S&W J FRAME SPRING KIT

874218000943 965321000

Ajouter de la fiabilitÃ©, amÃ©liorer la fonction

Ressorts de haute qualité pour améliorer les performances des armes de poing. Le fil à haute résistance à la traction offre un fonctionnement fiable. #321 S & W J Kit de ressort de cadre - RP 8 lb ressort de marteau ; Ressorts de rebond RP 13, 14 et 15 lb.

SPÃCIFICATIONS : RP = Puissance rÃ©duite, XP = Puissance supplÃ©mentaire.

Plus...

Add Reliability, Improve Function

High quality springs drop-in to improve handgun performance. High tensile strength wire delivers reliable function. #321 S&W J Frame Spring Kit - RP 8 lb hammer spring; RP 13, 14 & 15 lb rebound springs.

SPECS: RP = Reduced Power, XP = Extra Power.

Plus...

Évaluations client de WILSON COMBAT WILSON KIT # 321

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4,6

It's OK. (04/01/2011)

The hammer spring installed fine. But the 13# rebound spring was too long to install. Which I don't understand. Emailed Wilson Combat for advice with no success. Had to settle for the 14# spring instead.....good thing there were three choices huh? Trigger pull was marginally lighter but very rough.

Worked great (08/04/2011)

Unlike a previous reviewer I phoned Wilson about the too-long trigger return springs. They said that was on purpose as different age J frames may have different length springs. They said cut them to the length of the factory spring you remove. If you don't have a lathe to make one you should buy one of the two trigger return spring installation tools sold by Brownell's. Buying this kit doesn't make you a gunsmith. I also reccomend the Jerry Miculec trigger job video from Brownell's.

Worked fine for me!!! (26/02/2012)

http://www.youtube.com/watch?v=JIUfmg1JulE was a good video showing me how to do this. I would recommend using some grease this makes the re-assembly much better

Well worth the money (16/03/2012)

If you know what your doing, your can drastically change the trigger pull. This is definitely not a first timers project. If you have done gunsmithing previous, these springs with the appropiate polishing will definitely enhance the trigger pull.

First Timers Can Install This Kit (16/03/2013)

First timers will have no problems installing these springs if they follow the procedures shown in several online videos. No special tools required. Using only a 1/8" wide flat tipped screwdriver had no issues with either the hammer spring or 13# rebound slide spring during installation into my model 042. Neither spring required cutting. As a precaution against a flyaway slide spring, looped waxed dental floss through the OEM spring and tied off to trigger guard prior to spring removal. Did a similar thing with the replacement spring prior to installation. Once the spring is installed, the waxed floss easily pulls free. Reduced trigger pull by 1#-14.0 oz down to 9#-3.5 oz.

Wife would not shoot S&W Mod.60 without. (04/02/2016)

Was looking to buy another revolver for the Wife until I installed

the hammer spring and the middle trigger return spring in my S&W Model 60. Friends now want the kit for their J frame.

Wilson Combat - the revolver experts? (26/08/2016)

I didn't, and doubt that most shooters think of Wilson Combat as revolver experts. Think again. I installed their spring kit for S&W J Frame in my Model 37. Before: 12+ lb. double action, 5 lb. single action pull. After: 8.5 lb. double and 3 lb. single action, testing 100% reliable ignition with 5 different loads from 4 different brands of factory ammo, tested double and single action! Easily installed after watching some Youtube instructional videos. The only special tool I recommend is the inexpensive S&W trigger return spring tool from Brownells. I installed the hammer spring and the lightest of the trigger return springs, which functions just fine. Pretty much same story with the Wilson K/L/N Frame spring kit in my Model 10.

Lire 7 plus d'avis sur brownells.com

19.9 19.9 1 EUR

Référence: 965321000
WILSON COMBAT WILSON KIT # 321
Ref Fabricant: 321 874218000943 Ressorts de haute qualité pour améliorer les performances des armes de poing. Le fil à haute résistance à la traction offre un fonctionnement fiable. #321 S & W J Kit de ressort de cadre - RP 8 lb ressort de marteau ; Ressorts de rebond RP 13, 14 et 15 lb.

19.9 EUR 4 19,90 € *

Délai de livraison environ 14-21 jours.

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Poids du colis: 0,009kg Largeur d'expédition: 83mm Longueur d'expédition: 146mm UPC : 874218000943

Détails de l'article

Fabriqué au USA

Ajouter de la fiabilitÃ©, amÃ©liorer la fonction

SPÃCIFICATIONS : RP = Puissance rÃ©duite, XP = Puissance supplÃ©mentaire.

Plus...

Add Reliability, Improve Function

SPECS: RP = Reduced Power, XP = Extra Power.

Plus...

Évaluations client de WILSON COMBAT WILSON KIT # 321

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4,6

It's OK. (04/01/2011)

Worked great (08/04/2011)

Worked fine for me!!! (26/02/2012)

http://www.youtube.com/watch?v=JIUfmg1JulE was a good video showing me how to do this. I would recommend using some grease this makes the re-assembly much better

Well worth the money (16/03/2012)

First Timers Can Install This Kit (16/03/2013)

Wife would not shoot S&W Mod.60 without. (04/02/2016)

Was looking to buy another revolver for the Wife until I installed

the hammer spring and the middle trigger return spring in my S&W Model 60. Friends now want the kit for their J frame.

Wilson Combat - the revolver experts? (26/08/2016)

Lire 7 plus d'avis sur brownells.com