Garde de détente Billet 7075 pour AR-15 prête à être installée. Inclut une goupille et une vis pour l'installation sur des récepteurs inférieurs AR-15 standard. Usinée en aluminium 7075 et dotée d'une finition anodisée noire mate.
Plus...
AR-15 Billet 7075 Trigger Guard ready for installation. Includes roll pin & screw for installation on standard AR-15 lower receivers. Machined from 7075 aluminum and has a matte black anodized finish.
Plus...
Évaluations client de BROWNELLS AR-15 BILLET 7075 TRIGGER GUARD
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4,6
Good buy!(17/12/2017)
I had another AR trigger guard on backorder for sometime, so I decided to order one of these. I'm glad I did! More than enough room for a fingered glove, it looks good & it Installs easily and fit the Aero lower just fine. I ordered another for my other AR too. I've seen reviews where guys bemoan installing an AR trigger guard......Support the underside properly, use the correct roll pin punch and you won't have any cracked ears or other problems. Some common sense in installing many of the parts on a lower receiver goes a long way!
Perfect(01/01/2018)
Increased amount of room to better accommodate a gloved hand. Appears to be high quality construction. Fit perfect with no alteration required and looks good. No problems so far.
Out of spec or just really tight?(09/07/2018)
Product looks good, but man that roll pin hole is so tight, I could not get the roll pin to go in. I pulled the trigger guard out and even without the lower receiver involved, the roll pin still would not go into the trigger guard. I applied a LOT of force and resorted to the c-clamp trick which ended up working but mangled the roll pin and now I have a sharp spot.
Excellent Trigger Guard(30/07/2018)
At half the cost of Magpul, this billet aluminum trigger guard is a bargain. Installation is simple and the anodizing matches LMT lowers perfectly. Sure it doesnât score cool points like KAC, but it permits gloved operation, does not require fitting with mil-spec lowers, and isnât gaudy like other options. Highly recommended!
Tip: Use coil pins and a starter punch to make trigger guard installations a breeze.
Very disappointing to me, (08/08/2018)
First of all, my title and rating seem incongruous, but they are in fact totally accurate to me. The Brownell's trigger guard is well made, easy to install, and nothing wrong with it other than it is not the look that I wanted, not at all.
When I saw the Brownell's trigger guard at half the price of the Mag-Pul Enhanced aluminum TG, and seemingly shaped the same, I jumped on two of them. I Duracoated them in FDE and installed them on the lower. That's when I noticed the "belly" of the trigger guard is reverse that of the Mag-Pul. To me it looks backwards since all my other TGs are Mag-Pul with the "belly" in the center or or rear of center and below the trigger. The Brownell's has the "belly" forward of the trigger. It might actually work better with gloved hands than the Mag-Pul, but to me it looks bass-ackwards and unacceptable for my tastes. Since I Duracoated and installed them I am not going to embarrass myself asking for a return, but I will be ordering the Mag-Pul immediately. My fault totally, Brownell's clearly shows them with the belly to the front, but I did not pay close enough attention before ordering, but if you are looking for a cheaper priced Mag-Pul style trigger guard, this one is not it. Otherwise, it is an excellent trigger guard, hence the 5 star rating, but for me, I'm very disappointed.
Référence: 078101164 BROWNELLS AR-15 BILLET 7075 TRIGGER GUARD Ref Fabricant: 707600014121 Garde de détente Billet 7075 pour AR-15 prête à être installée. Inclut une goupille et une vis pour l'installation sur des récepteurs inférieurs AR-15 standard. Usinée en aluminium 7075 et dotée d'une finition anodisée noire mate.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Améliore ton AR-15 avec la Garde de détente Billet 7075 de BROWNELLS. Prête à l'installation, elle ajoute une touche élégante à ton arme! 🔧
Garde de détente Billet 7075 pour AR-15 prête à être installée. Inclut une goupille et une vis pour l'installation sur des récepteurs inférieurs AR-15 standard. Usinée en aluminium 7075 et dotée d'une finition anodisée noire mate.
Plus...
AR-15 Billet 7075 Trigger Guard ready for installation. Includes roll pin & screw for installation on standard AR-15 lower receivers. Machined from 7075 aluminum and has a matte black anodized finish.
Plus...
Évaluations client de BROWNELLS AR-15 BILLET 7075 TRIGGER GUARD
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4,6
Good buy!(17/12/2017)
I had another AR trigger guard on backorder for sometime, so I decided to order one of these. I'm glad I did! More than enough room for a fingered glove, it looks good & it Installs easily and fit the Aero lower just fine. I ordered another for my other AR too. I've seen reviews where guys bemoan installing an AR trigger guard......Support the underside properly, use the correct roll pin punch and you won't have any cracked ears or other problems. Some common sense in installing many of the parts on a lower receiver goes a long way!
Perfect(01/01/2018)
Increased amount of room to better accommodate a gloved hand. Appears to be high quality construction. Fit perfect with no alteration required and looks good. No problems so far.
Out of spec or just really tight?(09/07/2018)
Product looks good, but man that roll pin hole is so tight, I could not get the roll pin to go in. I pulled the trigger guard out and even without the lower receiver involved, the roll pin still would not go into the trigger guard. I applied a LOT of force and resorted to the c-clamp trick which ended up working but mangled the roll pin and now I have a sharp spot.
Excellent Trigger Guard(30/07/2018)
At half the cost of Magpul, this billet aluminum trigger guard is a bargain. Installation is simple and the anodizing matches LMT lowers perfectly. Sure it doesnât score cool points like KAC, but it permits gloved operation, does not require fitting with mil-spec lowers, and isnât gaudy like other options. Highly recommended!
Tip: Use coil pins and a starter punch to make trigger guard installations a breeze.
Very disappointing to me, (08/08/2018)
First of all, my title and rating seem incongruous, but they are in fact totally accurate to me. The Brownell's trigger guard is well made, easy to install, and nothing wrong with it other than it is not the look that I wanted, not at all.
When I saw the Brownell's trigger guard at half the price of the Mag-Pul Enhanced aluminum TG, and seemingly shaped the same, I jumped on two of them. I Duracoated them in FDE and installed them on the lower. That's when I noticed the "belly" of the trigger guard is reverse that of the Mag-Pul. To me it looks backwards since all my other TGs are Mag-Pul with the "belly" in the center or or rear of center and below the trigger. The Brownell's has the "belly" forward of the trigger. It might actually work better with gloved hands than the Mag-Pul, but to me it looks bass-ackwards and unacceptable for my tastes. Since I Duracoated and installed them I am not going to embarrass myself asking for a return, but I will be ordering the Mag-Pul immediately. My fault totally, Brownell's clearly shows them with the belly to the front, but I did not pay close enough attention before ordering, but if you are looking for a cheaper priced Mag-Pul style trigger guard, this one is not it. Otherwise, it is an excellent trigger guard, hence the 5 star rating, but for me, I'm very disappointed.
Aide et contact
(0) 
Newsletter
Vue classique
Vue mobile