Votre panier est vide.

Panier

BROWNELLS
AR-15/M16 SIGHT WRENCHES

078015001

Modèles pour A1 & A2 pour un ajustement de la visée rapide et facile

Même si en théorie tu es censé pouvoir ajuster ces visées avec rien de plus qu'une cartouche de munition, ceux qui ont essayé savent que ce n'est pas si simple. Cette petite clé de visée extrêmement pratique fait le travail, rapidement et facilement.

SPECS: Longueur 1-3/8" (3.5cm) x diamètre ¾" (19.0mm). Acier bleui. Modèles pour A1, à cinq branches (ajuste l'avant et l'arrière) et A2, à quatre branches.

Plus...

Models For A1 & A2 Make Sight Adjusting Quick & Easy

Even tho' you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've tried know it's just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy.

SPECS: 1-3/8" (3.5cm) long x ¾" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Plus...

Évaluations client de BROWNELLS A1 SIGHT WRENCH

Nombre d'évaluations: 21
De brownells.com: 21
Note moyenne: 2,9

Nice product! (02/10/2009)

Hard to find quality US made tools for sight adjustment anymore. This is a robust tool, and compact enough for take along.

ok tool but great customer service (20/10/2009)

so the first time i used it one of the teeth broke off and the rest got bent up real bad. i emailed Brownells and they let me exchange it for a new one. [...] im not sure if my sights are a little tight or the tool is a little weak. my new one works great, i just have to be gentle with it.

A2 sight wrench (05/01/2010)

Just used this wrench to set the sights on my Magpul BIUS. Worked great. The teeth seems a little thin, but still a value at this price.

Limited Use (27/04/2010)

I'm sure it is perfect for most A2 sights. It absolutely will not adjust Troy HK style BUIS. The shaft is too short to reach the base. I wish there had been a review addressing this before I bought it, but I'm not going to say that it is a bad product. I will keep it for other sights.

Too Short! (15/10/2010)

I'm sure this works fine on most AR sights, but not my new A.R.M.S. 71F front sight. The narrow barrel is too short to reach the detent because the knurled body hits the sight blades and stops right there. It just needs to be a bit longer, or the bevel at the shoulder needs to be narrower to make it a useful tool for some of the newer sight styles currently on the market.

Yes!finally a front site tool that works (07/02/2011)

Using another tool I could not lower my front post site any more..with this... 3 whole revolutions more! Time to go see if now my rifle isn't shooting low! I doubt it will last for long as the teeth are small..but it worked this time, hopefully it will have a long life.

Works good (17/11/2011)

Works good, adjusts the sight, and it will fit inside Brownell's AR-15 buttstock pouch cleaning kit, which is handy if you have that kit and an A2 buttstock.

Not strong enough (27/03/2012)

This tool is very convenient for adjusting that pain in the rear front site post, however, the prongs keep breaking. I have gone threw two of these so far. Some broke off while adjusting, the others in the padded compartment in my range bag.

No go on pre-ban Bushmasters (04/08/2012)

May work for most people but on three different pre-ban A2 Bushmasters it just did fit. The tool's front sight cylinder had the proper number of pins but was too small in diameter for the pins to fit into the notches on the front sight post.

Worked Perfect (13/08/2012)

Recently purchased a new rifle with A2 front sights and I could not get them to budge the way I was taught in the Army. My frustration at not being able to get my rifle zeroed with under 18 rounds was angering me! I even tried holding the detent down with a small nail and trying to turn the post with my leatherman and no movement. So I purchased this tool and within five minutes of it being opened from the plastic bag and nine rounds later...3 holes in the ring of the 25m target with iron sights and only resting on my ammo can in the prone position. The folks that are breaking these things must be holding their mouth wrong or something. It works great!

Works but it is a precise fit (12/09/2012)

The first time I tried to use the A2 tool I was at the range with three pre-ban A2 style Bushmasters and couldn't get it to fit the front post. I got frustrated, gave up and used a punch. HOWEVER, on a return trip with the same Bushmasters a little more patience proved the tool does fit properly. In fact it worked just fine, it's just a more precise fit than I was expecting the first go round. I expected a sloppy fit but it is a precision fit. Works better than a punch or unfired round. It left no marks, scars or mars. Feel much better about the purchase now. Four stars simply because I think this may be a case where a little slop is needed otherwise it's a five.

save your money (12/09/2012)

It does not depress the detent at all. If you depress the detent with something else, you can than adjust the sight with this tool, but needing an aditional tool kind of defeats the purpose

A well made, useful and useable tool (27/02/2014)

Because of the low ratings, I almost did not buy this tool but I am glad I took a chance. The tool is well made, machined from a solid chunk of steel. It fit perfectly in my front site, although because of some comments I knew the fit would be snug and allowed myself a few seconds to find the proper alignment. I removed the site and replaced it literally within seconds, unlike when using a separate tool to depress the detent. It also allows sufficient "feel" to make adjustments one click at a time, and so makes adjusting the front site at the range easier.

Fits my DDM4v1 stock sights perfectly (20/12/2014)

The sight wrench fits the stock iron sights on my DDM4v1 very well and allows me to adjust the sights without having to use two hands! The rifle is brand new and the sights were not movable with the tried and true bullet method so this tool was the perfect item for the job.

works like a charm (18/01/2015)

Given the reviews I'd read, I was unsure this thing would work. Like others I couldn't get a bullet to hold down the release button and turn the post on my Rock River A2, but on my first attempt, this wrench worked like a charm.

poor quality (24/08/2011)

one prong on the front sight was bent before it was even out of the package. When I attempted to straighten, it broke off.

You want the other AR15 Sight Wrench (03/12/2011)

The diameter of the 4 pronge end of the wrench was too wide to fit in my Bushmaster A2 upper.

Might work with a little grinding (16/02/2012)

The elevation end works the front sight OK. The windage end does not have enough prong length to retract the index pin. gonna have to get the Dremel out...

Avoid this tool (04/05/2012)

I don't know how this got into Brownell's catalog. It is so flimsy. The second time I went to adjust my front sight, one of the little nubs broke off in the assembly. You can get a better result by depressing the detente pin with an 8penny nail and turning the post with the eraser end of a common pencil.

ar15 sight tool (31/05/2012)

the four nubs on the tool are to short to adjust my yankee hill front sights..would not work on anybodys else at the range either..a very poor product

a-1 a-2 sight wrench (08/01/2016)

bought this a-2 wrench to adjust front sights. barrel part of wrench

will not even get close enough to turn the sight. can not even push the detent down with it. it works in there video, but what they sent me was a waste of my money. don't waste yours

Lire 21 plus d'avis sur brownells.com

23.9 28.9 2 EUR

Référence: 078015001
BROWNELLS A1 SIGHT WRENCH
Ref Fabricant: 1519 Même si en théorie tu es censé pouvoir ajuster ces visées avec rien de plus qu'une cartouche de munition, ceux qui ont essayé savent que ce n'est pas si simple. Cette petite clé de visée extrêmement pratique fait le travail, rapidement et facilement.

23.9 EUR 22 23,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Top takeaways

Cette clé de visée pratique permet d'ajuster facilement et rapidement les visées des fusils AR-15/M16.
Fabriquée en acier bleui, elle mesure 1-3/8" (3.5 cm) de longueur avec un diamètre de ¾" (19.0 mm).
Disponible en modèles A1 à cinq branches (pour ajuster l'avant et l'arrière) et A2 à quatre branches.

Caractéristiques

Fabrication: AR-15 Poids du colis: 0,045kg Hauteur d'expédition: 10mm Largeur d'expédition: 69mm Longueur d'expédition: 86mm

Détails de l'article

Fabriqué au USA

Référence: 078015002
BROWNELLS A2/M16 SIGHT WRENCH
Ref Fabricant: 1519A2 873781000596 Même si en théorie tu es censé pouvoir ajuster ces visées avec rien de plus qu'une cartouche de munition, ceux qui ont essayé savent que ce n'est pas si simple. Cette petite clé de visée extrêmement pratique fait le travail, rapidement et facilement.

28.9 EUR 0 28,90 € *

En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.

Caractéristiques: Fabrication: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

🔧 Ajustez facilement votre AR-15 avec la clé de visée BROWNELLS A1. Pratique et rapide, cet outil en acier bleui est indispensable. 🌟 Découvrez-le maintenant !

Modèles pour A1 & A2 pour un ajustement de la visée rapide et facile

SPECS: Longueur 1-3/8" (3.5cm) x diamètre ¾" (19.0mm). Acier bleui. Modèles pour A1, à cinq branches (ajuste l'avant et l'arrière) et A2, à quatre branches.

Plus...

Models For A1 & A2 Make Sight Adjusting Quick & Easy

SPECS: 1-3/8" (3.5cm) long x ¾" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Plus...

Évaluations client de BROWNELLS A1 SIGHT WRENCH

Nombre d'évaluations: 21
De brownells.com: 21
Note moyenne: 2,9

Nice product! (02/10/2009)

Hard to find quality US made tools for sight adjustment anymore. This is a robust tool, and compact enough for take along.

ok tool but great customer service (20/10/2009)

A2 sight wrench (05/01/2010)

Just used this wrench to set the sights on my Magpul BIUS. Worked great. The teeth seems a little thin, but still a value at this price.

Limited Use (27/04/2010)

Too Short! (15/10/2010)

Yes!finally a front site tool that works (07/02/2011)

Works good (17/11/2011)

Works good, adjusts the sight, and it will fit inside Brownell's AR-15 buttstock pouch cleaning kit, which is handy if you have that kit and an A2 buttstock.

Not strong enough (27/03/2012)

No go on pre-ban Bushmasters (04/08/2012)

Worked Perfect (13/08/2012)

Works but it is a precise fit (12/09/2012)

save your money (12/09/2012)

It does not depress the detent at all. If you depress the detent with something else, you can than adjust the sight with this tool, but needing an aditional tool kind of defeats the purpose

A well made, useful and useable tool (27/02/2014)

Fits my DDM4v1 stock sights perfectly (20/12/2014)

works like a charm (18/01/2015)

poor quality (24/08/2011)

one prong on the front sight was bent before it was even out of the package. When I attempted to straighten, it broke off.

You want the other AR15 Sight Wrench (03/12/2011)

The diameter of the 4 pronge end of the wrench was too wide to fit in my Bushmaster A2 upper.

Might work with a little grinding (16/02/2012)

The elevation end works the front sight OK. The windage end does not have enough prong length to retract the index pin. gonna have to get the Dremel out...

Avoid this tool (04/05/2012)

ar15 sight tool (31/05/2012)

the four nubs on the tool are to short to adjust my yankee hill front sights..would not work on anybodys else at the range either..a very poor product

a-1 a-2 sight wrench (08/01/2016)

Lire 21 plus d'avis sur brownells.com

Poursuivre vos achats

REAL AVID AR-15 SCRAPER
AR-15 SCRAPER

REAL AVID

En stock

47,90 € *

Outils Combinés

IOSSO PRODUCTS AR-15/AR-308 GAS TUBE BRUSH REFILL PACK
AR-15/ 308 AR TUBE BRUSH PACK

IOSSO PRODUCTS

En stock

13,90 € *

Kits de Nettoyage Carabine

BROWNELLS A2 AR-15 SIGHT WRENCH
AR-15 SIGHT WRENCH

BROWNELLS

En stock

23,90 € * 22,90 € - 26,90 €*

Clés

BROWNELLS ACCU-WEDGE
AR-15/M16 ACCU-WEDGE

BROWNELLS

Bientôt disponible

9,90 € *

Accu-Wedges

MAGPUL M-LOK RAIL 11 SLOT PICATINNY POLYMER BLACK 4.9"
AR-15 PICATINNY M-LOK RAIL POLYMER

MAGPUL

En stock

26,90 € * 18,90 € - 26,90 €*

Connexion

Mot de passe oublié ?
S'inscrire

Notre garantie - Votre satisfaction.

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous!
Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 90.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.

Nous vous garantissons votre satisfaction à 100% -Toujours!

Votre Equipe Brownells France.

Connectez-Vous

Brownells.fr

Catégories

Commander

Service Clientèle

Notre identité

Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.fr pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.