Augmente la polyvalence d'attache de sangle sur les fusils et carabines à crosse rétractable
Remplacement en acier usiné pour la plaque de récepteur d'origine, offrant à un AR équipé d'une crosse rétractable de type M4 un point d'attache pratique et discret pour des sangles à clip unique. Usiné avec précision à partir d'acier au carbone 1018 pour une résistance supérieure et un ajustement exact, avec une finition durable en phosphate de manganèse Parkerisée qui résiste à l'abrasion de surface et à la corrosion, tout en correspondant à la finition des récepteurs anodisés conforme aux spécifications militaires. Disponible en configuration à boucle unique pour droitier (RH) ainsi qu'en configuration ambidextre pratique et polyvalente qui vous permet de changer la sangle d'un côté à l'autre du récepteur. Un adaptateur désigné comme adaptateur droitier (RH) est destiné aux tireurs droitiers et sera monté sur le côté gauche de l'arme. Les photos montrent l'adaptateur de sangle vu de l'arrière.
SPÉCIFICATIONS : Acier 1018, finition noire mate Parkerisée. S'adapte aux AR-15/M16/M4 et clones équipés d'une crosse rétractable de type M4.
Plus...
Increases Sling-Attachment Versatility On Collapsible-Stock Rifles & Carbines
Machined steel replacement for the factory receiver plate gives an AR fitted with an M4-type collapsible buttstock a convenient, low-profile attachment point for clip-on, single-point slings. Precision machined from 1018 carbon steel for superior strength and an exact fit, with a durable manganese phosphate Parkerized finish that resists surface abrasion and corrosion, and matches the finish on mil-spec anodized receivers. Available in single-loop Right-Hand (RH) as well as a convenient, versatile Ambidextrous configuration that lets you swap the sling from one side of the receiver to the other. An adapter that is designated as a right hand (RH) adapter is for right handed shooters and will be mounted on the left side of the gun. Photos are of viewing the sling adapter from the rear.
SPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.
Plus...
Évaluations client de DOUBLE STAR AMBIDEXTROUS SLING ADAPTER PLATE
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 3,4
Solid(18/03/2010)
Purchased two Right hand sets to complete Aero Precision lowers. They are thicker than standard receiver plates and seem like a nice addition for a single point sling set up. The lower sections and loop are a bit too "squared" and don't fully compliment its attachment to lower receiver.Just a small disappointment to an otherwise solid product at a great price.
Good product(04/02/2011)
Recently purchased 50 of these to outfit department's new Patrol Rifles. With the exception of two, they fit the mil-spec diameter buffer tubes. The remaining two only required minor adjustment of the indexing stud with a file. They do their job at an excellent price.
Worth every penny(19/04/2011)
Own 6 AR15s now, and have customized literally HUNDREDS of them for friends. ANY of them with colapsable stocks get this modification. for a few bucks, why NOT, add to it a inexpensive single point sling and your ready to go, wether its hunting, competative shooting, or just for the comfort of carry. Im sold on them !!
Flawless Install(25/10/2011)
Just installed this on my TROY MOD 1 M14/M1A build. Installs flawlessly and is really sturdy!
Great Product(06/11/2011)
Works great with the 1 1/4" HK-Style Sling Snap Hook (product 080-000-797). Solid and silent. It's all you need for the right price!
Cheap for a reason(24/12/2011)
Cheap steel. the single point sling i have dug into the steel of the end plate easily no matter how it was configured. Don't buy, you will just have to buy another one.
Poor fit for a mil-spec Armalite tube(08/06/2012)
I tried to fit this end plate on the mil-spec tube that came with my Armalite rifle, but it would not fit over the threads.
Okay(11/05/2013)
It works for single point slings HK style hooks real well. It looks to be cheaply made, and unfortunately I had to file it a bit to get it to fit on my buffer tube alignment notch. I tried 3 different tubes I had and it wouldn't slip over and align with the notch on the tubes until I filed it only just a little bit. It does not fit with certain pistol grips like the Magpul MIAD or others that have the bit that extends over the lower receiver.
works on pistol buffer tube (12/03/2016)
i needed an ambi single pt adapter for an AR pistol buffer tube setup. no one talks about fit for the pistol buffer tubes. this worked like a champ with minor modification - filling down the notch - which coincidentally makes the notch look like receiver plate that came with the pistol setup. the steel is soft enough that a hand file was sufficient to the task in a matter of minutes; so it may not last, but the price was good and it appears to working for now. i am buying more for other builds. it does not get in the way of the charging handle or forward assist.
Functional at a good price(26/06/2017)
I purchased this item for a carbine rifle build. The item is constructed well and fits nicely. It came packed with no instructions on how to install, which for me was not a problem, but someone who does not know what they are doing it might pose an issue. I am a certified AR-15 / M-16 Armorer and I am the police department armorer I use a single point sling on my rifle and this item will be utilized and works well for my law enforcement job.
Not Good is too high of a rating(22/11/2010)
I installed 150 of these on our departments rifles. Within 45 days the slings had wore through the sling mount and we had rifles falling to the floor. 1018 steel is too weak. Do not buy this product.
Référence: 100004532 DOUBLE STAR AMBIDEXTROUS SLING ADAPTER PLATE Ref Fabricant: JT345841348100454 Remplacement en acier usiné pour la plaque de récepteur d'origine, offrant à un AR équipé d'une crosse rétractable de type M4 un point d'attache pratique et discret pour des sangles à clip unique. Usiné avec précision à partir d'acier au carbone 1018 pour une résistance supérieure et un ajustement exact, avec une finition durable en phosphate de manganèse Parkerisée qui résiste à l'abrasion de surface et à la corrosion, tout en correspondant à la finition des récepteurs anodisés conforme aux spécifications militaires. Disponible en configuration à boucle unique pour droitier (RH) ainsi qu'en configuration ambidextre pratique et polyvalente qui vous permet de changer la sangle d'un côté à l'autre du récepteur. Un adaptateur désigné comme adaptateur droitier (RH) est destiné aux tireurs droitiers et sera monté sur le côté gauche de l'arme. Les photos montrent l'adaptateur de sangle vu de l'arrière.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 100004533 DOUBLE STAR RH SLING ADAPTER PLATE Ref Fabricant: JT345R841348100478 Remplacement en acier usiné pour la plaque de récepteur d'origine, offrant à un AR équipé d'une crosse rétractable de type M4 un point d'attache pratique et discret pour des sangles à clip unique. Usiné avec précision à partir d'acier au carbone 1018 pour une résistance supérieure et un ajustement exact, avec une finition durable en phosphate de manganèse Parkerisée qui résiste à l'abrasion de surface et à la corrosion, tout en correspondant à la finition des récepteurs anodisés conforme aux spécifications militaires. Disponible en configuration à boucle unique pour droitier (RH) ainsi qu'en configuration ambidextre pratique et polyvalente qui vous permet de changer la sangle d'un côté à l'autre du récepteur. Un adaptateur désigné comme adaptateur droitier (RH) est destiné aux tireurs droitiers et sera monté sur le côté gauche de l'arme. Les photos montrent l'adaptateur de sangle vu de l'arrière.
25.9EUR025,90 €
*
En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
Augmente la polyvalence d'attache de sangle sur les fusils et carabines à crosse rétractable
Remplacement en acier usiné pour la plaque de récepteur d'origine, offrant à un AR équipé d'une crosse rétractable de type M4 un point d'attache pratique et discret pour des sangles à clip unique. Usiné avec précision à partir d'acier au carbone 1018 pour une résistance supérieure et un ajustement exact, avec une finition durable en phosphate de manganèse Parkerisée qui résiste à l'abrasion de surface et à la corrosion, tout en correspondant à la finition des récepteurs anodisés conforme aux spécifications militaires. Disponible en configuration à boucle unique pour droitier (RH) ainsi qu'en configuration ambidextre pratique et polyvalente qui vous permet de changer la sangle d'un côté à l'autre du récepteur. Un adaptateur désigné comme adaptateur droitier (RH) est destiné aux tireurs droitiers et sera monté sur le côté gauche de l'arme. Les photos montrent l'adaptateur de sangle vu de l'arrière.
SPÉCIFICATIONS : Acier 1018, finition noire mate Parkerisée. S'adapte aux AR-15/M16/M4 et clones équipés d'une crosse rétractable de type M4.
Plus...
Increases Sling-Attachment Versatility On Collapsible-Stock Rifles & Carbines
Machined steel replacement for the factory receiver plate gives an AR fitted with an M4-type collapsible buttstock a convenient, low-profile attachment point for clip-on, single-point slings. Precision machined from 1018 carbon steel for superior strength and an exact fit, with a durable manganese phosphate Parkerized finish that resists surface abrasion and corrosion, and matches the finish on mil-spec anodized receivers. Available in single-loop Right-Hand (RH) as well as a convenient, versatile Ambidextrous configuration that lets you swap the sling from one side of the receiver to the other. An adapter that is designated as a right hand (RH) adapter is for right handed shooters and will be mounted on the left side of the gun. Photos are of viewing the sling adapter from the rear.
SPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.
Plus...
Évaluations client de DOUBLE STAR AMBIDEXTROUS SLING ADAPTER PLATE
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 3,4
Solid(18/03/2010)
Purchased two Right hand sets to complete Aero Precision lowers. They are thicker than standard receiver plates and seem like a nice addition for a single point sling set up. The lower sections and loop are a bit too "squared" and don't fully compliment its attachment to lower receiver.Just a small disappointment to an otherwise solid product at a great price.
Good product(04/02/2011)
Recently purchased 50 of these to outfit department's new Patrol Rifles. With the exception of two, they fit the mil-spec diameter buffer tubes. The remaining two only required minor adjustment of the indexing stud with a file. They do their job at an excellent price.
Worth every penny(19/04/2011)
Own 6 AR15s now, and have customized literally HUNDREDS of them for friends. ANY of them with colapsable stocks get this modification. for a few bucks, why NOT, add to it a inexpensive single point sling and your ready to go, wether its hunting, competative shooting, or just for the comfort of carry. Im sold on them !!
Flawless Install(25/10/2011)
Just installed this on my TROY MOD 1 M14/M1A build. Installs flawlessly and is really sturdy!
Great Product(06/11/2011)
Works great with the 1 1/4" HK-Style Sling Snap Hook (product 080-000-797). Solid and silent. It's all you need for the right price!
Cheap for a reason(24/12/2011)
Cheap steel. the single point sling i have dug into the steel of the end plate easily no matter how it was configured. Don't buy, you will just have to buy another one.
Poor fit for a mil-spec Armalite tube(08/06/2012)
I tried to fit this end plate on the mil-spec tube that came with my Armalite rifle, but it would not fit over the threads.
Okay(11/05/2013)
It works for single point slings HK style hooks real well. It looks to be cheaply made, and unfortunately I had to file it a bit to get it to fit on my buffer tube alignment notch. I tried 3 different tubes I had and it wouldn't slip over and align with the notch on the tubes until I filed it only just a little bit. It does not fit with certain pistol grips like the Magpul MIAD or others that have the bit that extends over the lower receiver.
works on pistol buffer tube (12/03/2016)
i needed an ambi single pt adapter for an AR pistol buffer tube setup. no one talks about fit for the pistol buffer tubes. this worked like a champ with minor modification - filling down the notch - which coincidentally makes the notch look like receiver plate that came with the pistol setup. the steel is soft enough that a hand file was sufficient to the task in a matter of minutes; so it may not last, but the price was good and it appears to working for now. i am buying more for other builds. it does not get in the way of the charging handle or forward assist.
Functional at a good price(26/06/2017)
I purchased this item for a carbine rifle build. The item is constructed well and fits nicely. It came packed with no instructions on how to install, which for me was not a problem, but someone who does not know what they are doing it might pose an issue. I am a certified AR-15 / M-16 Armorer and I am the police department armorer I use a single point sling on my rifle and this item will be utilized and works well for my law enforcement job.
Not Good is too high of a rating(22/11/2010)
I installed 150 of these on our departments rifles. Within 45 days the slings had wore through the sling mount and we had rifles falling to the floor. 1018 steel is too weak. Do not buy this product.