Grande surface utilisable de 4" de diamètre ne s'enfoncera pas et ne marquera pas
La taille et le poids supplémentaires aident à garder ces blocs à l'endroit où tu les mets, et la grande surface élimine une grande partie de l'« équilibre » lorsque tu drives des goupilles. Ne peut pas marquer même la surface la plus polie. Deux modèles différents. Vert - Pour les fusils et les carabines ; percé de quatre trous pour un retrait et un démontage plus faciles des goupilles. Le « V » central pratique maintient les pièces cylindriques en place pour qu'elles ne roulent pas. Bleu - Pour les revolvers et les pistolets. Des trous plus grands et un « V » partiel maintiennent les canons de pistolet pour une installation et un retrait plus faciles des goupilles de liaison. Peut être percé ou modifié avec des outils à main ; ne fondra pas lors de l'usinage.
SPÉCIFICATIONS : Polyéthylène, vert ou bleu. 4" (10cm) de diamètre, 1-1⁄8" (2.8cm) de hauteur.
Plus...
Large, 4" Diameter, Useable Surface Will Not Embed Or Mar
Extra size and weight helps keep these blocks where you put them and the big face eliminates much of the “balancing act” when you’re driving pins. Cannot mar even the most highly polished surface. Two different models. Green - For rifles and shotguns; drilled with four through holes for easier pin removal and disassembly. Convenient, center “V” holds cylindrically shaped parts steady so they won’t roll. Blue - For revolvers and pistols. Larger through holes and partial “V” holds pistol barrels for easier link pin installation and removal. Can be drilled or modified with hand tools; will not melt when machined.
SPECS: Polyethylene, green or blue. 4" (10cm) diameter, 1-1⁄8" (2.8cm) high.
Plus...
Évaluations client de BROWNELLS PISTOL BENCH BLOCK
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4,8
Hamd bench tool(18/11/2009)
Any time I had to drive a pin I had to find a hole in my work bench to allow the pin to drop into. With this inexpensive little gem, I not only have the hole, but I also have a vee notch to steady the firearm. Works like a charm. well worth the money even if you only need it once.
Great item(20/11/2009)
greatly eases the process of removing a variety of pins from the frames of numerous types of handguns. keeps you from maring the frame on the table when removing the pins.
Very useful(02/05/2011)
This block is great for a number of gunsmithing jobs. I use it often. Its very durable and wont mar the finish on your guns
Versatile block(09/02/2015)
Since I had this block, goodbye to all those wood blocks that I could just find around when doing gunsmithing. I love the holes for the pins to drop and the channel across this block which secures barrels, slides during repair our punching out pins.
Mainspring housing woes? Get this!(04/05/2016)
Disassembling a 1911 mainspring housing with lanyard loop is a snap with this block. Position the housing so it doesn't move with loop down in a hole, press down (hard, always) and remove the retainer pin. Avoid the dreaded vice claws and don't be afraid to clean out your housing and replace the spring. Of course, I also use the block for anything that needs to be punched out. Armorer's plates are great but $$$. I consider this a versatile tool at a value price.
Invaluable tool(16/09/2009)
This tool makes driving pins in and out a piece of cake. Any repair kit is incomplete without a good bench block, and this is a very good bench block.
A must for any bench(08/11/2009)
This thing can take a beating. Perfect for driving out pins and you can drill it easily to make custom jig.
It really won't mar either.
wow(21/11/2009)
I can't believe I've gotten along without one for so long! Easily modified to meet your individual needs.
Must have rifle tool(07/03/2012)
Great product, prevents marring your rifle while working on it. Great if you're putting together your own lowers.
Just what the Doctor Ordered(12/06/2015)
The best bench block for all your rifle needs very durable, you can't go wrong with this item.
Large and Versitle for Rifles(14/09/2015)
I used this block immediately upon delivery to install a different AR15 fire control group. This block is very large with good sized through holes to drive a varitey of pins. I think the V channel will also be excellent for laying a Ruger MKII/III barrel on when tapping in those uncooperative bolt retention/mainspring packs. Definitely a must have along with a gunsmithing hammer with plastic/delrin and brass faces. A big roll of duct tape has always worked for me, but I like the V channel of this block that gives it some more versatility. I'll be grabbing this block instead of the duct tape roll now.
Works Fine(17/05/2016)
Worked fine with my AR15. But before I used it, I sanded down the edges of the center channel since it was still a little rough, and also to make the edges more "curved" instead it's sharp angle.
When I removed the pin from my FSB, some of the black phosphate finish rubbed off. I'll apply some electrical tape on the edges next time I use it.
Référence: 080000493 BROWNELLS PISTOL BENCH BLOCK Ref Fabricant: NONE050806006263 La taille et le poids supplémentaires aident à garder ces blocs à l'endroit où tu les mets, et la grande surface élimine une grande partie de l'« équilibre » lorsque tu drives des goupilles. Ne peut pas marquer même la surface la plus polie. Deux modèles différents. Vert - Pour les fusils et les carabines ; percé de quatre trous pour un retrait et un démontage plus faciles des goupilles. Le « V » central pratique maintient les pièces cylindriques en place pour qu'elles ne roulent pas. Bleu - Pour les revolvers et les pistolets. Des trous plus grands et un « V » partiel maintiennent les canons de pistolet pour une installation et un retrait plus faciles des goupilles de liaison. Peut être percé ou modifié avec des outils à main ; ne fondra pas lors de l'usinage.
54.9EUR29254,90 €
*
Délai de livraison environ 14-21 jours.
Caractéristiques:Fabrication: Universel Arme de Poing
Les blocs extra-larges offrent une grande surface pour un maintien stable lors de l'enfoncement des goupilles.
Deux modèles disponibles : vert pour fusils et carabines, bleu pour revolvers et pistolets.
Fabriqués en polyéthylène, ils peuvent être modifiés sans fondre lors de l'usinage.
Caractéristiques
Fabrication:
Universel Arme de Poing
Poids du colis: 0,249kgHauteur d'expédition: 36mmLargeur d'expédition: 99mmLongueur d'expédition: 99mm
UPC
: 050806006263
Détails de l'article
Fabriqué au USA
Référence: 080000492 BROWNELLS RIFLE BENCH BLOCK Ref Fabricant: NONE050806006256 La taille et le poids supplémentaires aident à garder ces blocs à l'endroit où tu les mets, et la grande surface élimine une grande partie de l'« équilibre » lorsque tu drives des goupilles. Ne peut pas marquer même la surface la plus polie. Deux modèles différents. Vert - Pour les fusils et les carabines ; percé de quatre trous pour un retrait et un démontage plus faciles des goupilles. Le « V » central pratique maintient les pièces cylindriques en place pour qu'elles ne roulent pas. Bleu - Pour les revolvers et les pistolets. Des trous plus grands et un « V » partiel maintiennent les canons de pistolet pour une installation et un retrait plus faciles des goupilles de liaison. Peut être percé ou modifié avec des outils à main ; ne fondra pas lors de l'usinage.
Grande surface utilisable de 4" de diamètre ne s'enfoncera pas et ne marquera pas
La taille et le poids supplémentaires aident à garder ces blocs à l'endroit où tu les mets, et la grande surface élimine une grande partie de l'« équilibre » lorsque tu drives des goupilles. Ne peut pas marquer même la surface la plus polie. Deux modèles différents. Vert - Pour les fusils et les carabines ; percé de quatre trous pour un retrait et un démontage plus faciles des goupilles. Le « V » central pratique maintient les pièces cylindriques en place pour qu'elles ne roulent pas. Bleu - Pour les revolvers et les pistolets. Des trous plus grands et un « V » partiel maintiennent les canons de pistolet pour une installation et un retrait plus faciles des goupilles de liaison. Peut être percé ou modifié avec des outils à main ; ne fondra pas lors de l'usinage.
SPÉCIFICATIONS : Polyéthylène, vert ou bleu. 4" (10cm) de diamètre, 1-1⁄8" (2.8cm) de hauteur.
Plus...
Large, 4" Diameter, Useable Surface Will Not Embed Or Mar
Extra size and weight helps keep these blocks where you put them and the big face eliminates much of the “balancing act” when you’re driving pins. Cannot mar even the most highly polished surface. Two different models. Green - For rifles and shotguns; drilled with four through holes for easier pin removal and disassembly. Convenient, center “V” holds cylindrically shaped parts steady so they won’t roll. Blue - For revolvers and pistols. Larger through holes and partial “V” holds pistol barrels for easier link pin installation and removal. Can be drilled or modified with hand tools; will not melt when machined.
SPECS: Polyethylene, green or blue. 4" (10cm) diameter, 1-1⁄8" (2.8cm) high.
Plus...
Évaluations client de BROWNELLS PISTOL BENCH BLOCK
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4,8
Hamd bench tool(18/11/2009)
Any time I had to drive a pin I had to find a hole in my work bench to allow the pin to drop into. With this inexpensive little gem, I not only have the hole, but I also have a vee notch to steady the firearm. Works like a charm. well worth the money even if you only need it once.
Great item(20/11/2009)
greatly eases the process of removing a variety of pins from the frames of numerous types of handguns. keeps you from maring the frame on the table when removing the pins.
Very useful(02/05/2011)
This block is great for a number of gunsmithing jobs. I use it often. Its very durable and wont mar the finish on your guns
Versatile block(09/02/2015)
Since I had this block, goodbye to all those wood blocks that I could just find around when doing gunsmithing. I love the holes for the pins to drop and the channel across this block which secures barrels, slides during repair our punching out pins.
Mainspring housing woes? Get this!(04/05/2016)
Disassembling a 1911 mainspring housing with lanyard loop is a snap with this block. Position the housing so it doesn't move with loop down in a hole, press down (hard, always) and remove the retainer pin. Avoid the dreaded vice claws and don't be afraid to clean out your housing and replace the spring. Of course, I also use the block for anything that needs to be punched out. Armorer's plates are great but $$$. I consider this a versatile tool at a value price.
Invaluable tool(16/09/2009)
This tool makes driving pins in and out a piece of cake. Any repair kit is incomplete without a good bench block, and this is a very good bench block.
A must for any bench(08/11/2009)
This thing can take a beating. Perfect for driving out pins and you can drill it easily to make custom jig.
It really won't mar either.
wow(21/11/2009)
I can't believe I've gotten along without one for so long! Easily modified to meet your individual needs.
Must have rifle tool(07/03/2012)
Great product, prevents marring your rifle while working on it. Great if you're putting together your own lowers.
Just what the Doctor Ordered(12/06/2015)
The best bench block for all your rifle needs very durable, you can't go wrong with this item.
Large and Versitle for Rifles(14/09/2015)
I used this block immediately upon delivery to install a different AR15 fire control group. This block is very large with good sized through holes to drive a varitey of pins. I think the V channel will also be excellent for laying a Ruger MKII/III barrel on when tapping in those uncooperative bolt retention/mainspring packs. Definitely a must have along with a gunsmithing hammer with plastic/delrin and brass faces. A big roll of duct tape has always worked for me, but I like the V channel of this block that gives it some more versatility. I'll be grabbing this block instead of the duct tape roll now.
Works Fine(17/05/2016)
Worked fine with my AR15. But before I used it, I sanded down the edges of the center channel since it was still a little rough, and also to make the edges more "curved" instead it's sharp angle.
When I removed the pin from my FSB, some of the black phosphate finish rubbed off. I'll apply some electrical tape on the edges next time I use it.