Cet adaptateur de forend pour banc de tir transforme rapidement presque n'importe quelle crosse en crosse de banc de tir. Aucune modification de votre crosse n'est nécessaire. Il suffit d'insérer la vis appropriée (incluse) à travers l'adaptateur de forend et de la visser dans le trou du point d'attache avant. Les plaques latérales s'ajustent vers l'intérieur pour s'adapter au design du forend de votre carabine. Le matériau en liège protège la finition de la crosse. La plaque inférieure de 3 pouces de large est fabriquée en UHMW solide, qui a un faible coefficient de friction. Accepte des largeurs de forend allant de une pouce et un quart à deux pouces et trois huit.
Plus...
This benchrest forend adaptor quickly converts almost any stock into a benchrest stock. No modifications to your stock are necessary. Simply insert the appropriate screw (included) through the forend adaptor and thread it into the front sling stud hole. The side plates adjust inward to configure to the forend design of your rifle. Cork material protects the stock finish. The 3 inches wide bottom plate is made of solid UHMW, which has a low coefficient of friction. Accepts forend widths from one and one fourth inches to two and three eight inches.
Plus...
Évaluations client de SINCLAIR INTERNATIONAL SWIVEL MOUNT BENCHREST ADAPTOR
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 5
Forend benchrest adaptor(06/12/2011)
If you want to shoot a sporter from the bench, this is the way to go. It will make all the difference in the world in your score. I own one and am buying two more
Must have for benching a sporter stock(03/01/2012)
Prior to installing this adaptor, attempting to get great results from my sporter stocked rifle was difficult. Even the slightest change in the cant of the rifle made the crosshairs move off he bullseye. I definitely wasn't getting the most accuracy from my premium barrel and ammo. I didn't have a stud installed so I had to do that myself which was relatively easy. Just measure over and over til your positive you know where dead center is and make sure your drill is perfectly straight when drilling the hole. After installing I tried it out on my Caldwell BR rest and was THRILLED! Once the crosshairs were on target they stay there without any movement. After recoiling, all that has to be done is to push the rifle back into place and the crosshairs are right where they were before the shot. Great product...I highly recommend it for anyone using a thin forearmed rifle off a mechanical bench rest! The only con for me is that I wish the base was a less flashy color, maybe black or grey.
great upgrade to a sporter forend(21/05/2012)
keeps the gun stable. I bought it to help my stock rifle ride the bags better at club shoots. This was a much needed upgrade. Increased my scores for sure.
Just the right product(23/05/2012)
Ordered this for my Winchester pre A 52. Like to shoot benchrest but did not want to change my stock. This product works perfect on my gun able to keep the gun steady in the rest. Was able to shoot my best score at 100 yards because of this product.
A GREAT ADAPTER(25/05/2012)
I put this adapter on my Remington 700 Police .308 which has been modified for benchrest. Made all the difference. Rides the bag beautifully. Am buying a Remington 40XB 6mm and will put one of these on that gun as well!!!! Just one little suggestion....PAINT IT BLACK!!!!
Works VERY well(04/01/2016)
Pros
-Works as advertised and makes those skinny hunting stocks ride the bag like a boss.
Cons
- Takes a little time to get it setup and trying to get the stock in the middle of the adapter, but not bad
Référence: 749004954 SINCLAIR INTERNATIONAL SWIVEL MOUNT BENCHREST ADAPTOR Ref Fabricant: 04-1700 Cet adaptateur de forend pour banc de tir transforme rapidement presque n'importe quelle crosse en crosse de banc de tir. Aucune modification de votre crosse n'est nécessaire. Il suffit d'insérer la vis appropriée (incluse) à travers l'adaptateur de forend et de la visser dans le trou du point d'attache avant. Les plaques latérales s'ajustent vers l'intérieur pour s'adapter au design du forend de votre carabine. Le matériau en liège protège la finition de la crosse. La plaque inférieure de 3 pouces de large est fabriquée en UHMW solide, qui a un faible coefficient de friction. Accepte des largeurs de forend allant de une pouce et un quart à deux pouces et trois huit.
84.9EUR084,90 €
*
En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
Cet adaptateur de forend pour banc de tir transforme rapidement presque n'importe quelle crosse en crosse de banc de tir. Aucune modification de votre crosse n'est nécessaire. Il suffit d'insérer la vis appropriée (incluse) à travers l'adaptateur de forend et de la visser dans le trou du point d'attache avant. Les plaques latérales s'ajustent vers l'intérieur pour s'adapter au design du forend de votre carabine. Le matériau en liège protège la finition de la crosse. La plaque inférieure de 3 pouces de large est fabriquée en UHMW solide, qui a un faible coefficient de friction. Accepte des largeurs de forend allant de une pouce et un quart à deux pouces et trois huit.
Plus...
This benchrest forend adaptor quickly converts almost any stock into a benchrest stock. No modifications to your stock are necessary. Simply insert the appropriate screw (included) through the forend adaptor and thread it into the front sling stud hole. The side plates adjust inward to configure to the forend design of your rifle. Cork material protects the stock finish. The 3 inches wide bottom plate is made of solid UHMW, which has a low coefficient of friction. Accepts forend widths from one and one fourth inches to two and three eight inches.
Plus...
Évaluations client de SINCLAIR INTERNATIONAL SWIVEL MOUNT BENCHREST ADAPTOR
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 5
Forend benchrest adaptor(06/12/2011)
If you want to shoot a sporter from the bench, this is the way to go. It will make all the difference in the world in your score. I own one and am buying two more
Must have for benching a sporter stock(03/01/2012)
Prior to installing this adaptor, attempting to get great results from my sporter stocked rifle was difficult. Even the slightest change in the cant of the rifle made the crosshairs move off he bullseye. I definitely wasn't getting the most accuracy from my premium barrel and ammo. I didn't have a stud installed so I had to do that myself which was relatively easy. Just measure over and over til your positive you know where dead center is and make sure your drill is perfectly straight when drilling the hole. After installing I tried it out on my Caldwell BR rest and was THRILLED! Once the crosshairs were on target they stay there without any movement. After recoiling, all that has to be done is to push the rifle back into place and the crosshairs are right where they were before the shot. Great product...I highly recommend it for anyone using a thin forearmed rifle off a mechanical bench rest! The only con for me is that I wish the base was a less flashy color, maybe black or grey.
great upgrade to a sporter forend(21/05/2012)
keeps the gun stable. I bought it to help my stock rifle ride the bags better at club shoots. This was a much needed upgrade. Increased my scores for sure.
Just the right product(23/05/2012)
Ordered this for my Winchester pre A 52. Like to shoot benchrest but did not want to change my stock. This product works perfect on my gun able to keep the gun steady in the rest. Was able to shoot my best score at 100 yards because of this product.
A GREAT ADAPTER(25/05/2012)
I put this adapter on my Remington 700 Police .308 which has been modified for benchrest. Made all the difference. Rides the bag beautifully. Am buying a Remington 40XB 6mm and will put one of these on that gun as well!!!! Just one little suggestion....PAINT IT BLACK!!!!
Works VERY well(04/01/2016)
Pros
-Works as advertised and makes those skinny hunting stocks ride the bag like a boss.
Cons
- Takes a little time to get it setup and trying to get the stock in the middle of the adapter, but not bad