Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

MAGPUL
GL ENHANCED MAGAZINE WELLS FOR GLOCK® 17 GEN 3

840815117520 100900004

Assurez l'insertion du chargeur dans des situations stressantes

Le Magpul GL Enhanced Magazine Well est optimisé pour une utilisation avec des chargeurs d'origine Glock de capacité standard, des chargeurs Magpul GL, ainsi qu'une variété de plaques de fond et d'extensions du marché secondaire disponibles pour les deux. Les générations récentes de chargeurs Glock d'origine à capacité réduite (10 coups) présentent plusieurs différences dimensionnelles qui peuvent interférer avec n'importe quel magazine well, y compris le Magpul GL Enhanced Magazine Well. Certaines grandes plaques de fond du marché secondaire peuvent également causer des interférences.

Plus...

Ensure Mag Insertion in Stressful Situations

The Magpul GL Enhanced Magazine Well for GLOCK 17 GEN 3 is a high performance, purpose-built GLOCK frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events. The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity GLOCK factory magazines, Magpul GL9® PMAGs®, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory GLOCK magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere. Due to inherent variances in GLOCK frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force, Magpul recommend that a professional gunsmith complete the installation to mitigate the potential for frame damage. Made in the USA. FEATURES Reinforced polymer construction Easy installation Rugged polymer formula holds up to rough handling Large ramp area for easier reloading External dimensions ensure minimal printing during concealed carry Compatible with Magpul, OEM and most aftermarket floor plates and magazine extensions COMPATIBILITY Fits GEN 3 versions of the: G17, G17L, G22, G24, G31, G34, G35, G37. Compatible with Magpul, OEM and most aftermarket magazine floor plates. Compatible with most common after-market magazine extensions. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. Neither Brownells nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.m.b.H. products and parts visit www.glock.com.

Plus...

Évaluations client de MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK

Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 2,8

Be Careful (02/10/2017)

Will not work if you're using Glock backstraps, unless you are willing to modify.

Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.

DANGER/RIP OFF (30/09/2018)

There are three things wrong with this product that kills any usefulness. 1) Once installed, it will eliminate any ability to strip a stuck mag. The magpul part fills the magwell so that there is no room to gab the floor plate to assist in removing the mag. You will be at the total mercy of the mag free falling. 2) once installed, you will not be able to use any aftermarket mag floor plates, not even minimal ones from Vickers 3) It is not compatible with backstraps. You can file and file away to get it to fit, but chances are that you will do a poor job and it will have thrown away $20.

Mines defective! (18/06/2017)

This unit was super easy to install, it took me less than 15 seconds. The build quality appears good, until you insert a magazine. It does NOT go in easy! You literally have to slam it in hard for the magazine to properly catch,10 magazines later my palm couldn't take it no more! The next morning I called Magpul, they're sending me a replacement unit, but they claim this is normal, ??? If the new unit works, then I will update my review.

Another GREAT product from Magpul (29/06/2017)

It's a great mag-well! I installed them on all of my Gen-3's. They take about 30 seconds to install. They do make it easier and faster to do slide-lock (emergency) reloads. My only issue was that, some of my Gen-3's were a bit older and had a cutout on the front strap of the frame. I didn't care for the gap, so I contacted Glock USA and inquired into getting new frames, without the cutout. I followed their instructions, and in less than 10 days I had new replacement frames, without the cutout. I have to say, I was very impressed with Glock's service! All is good now!

Lire 4 plus d'avis sur brownells.com

38.9 38.9 1 EUR

Référence: 100900004
MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK
Ref Fabricant: MAG908-BLK 840815117520 Le Magpul GL Enhanced Magazine Well est optimisé pour une utilisation avec des chargeurs d'origine Glock de capacité standard, des chargeurs Magpul GL, ainsi qu'une variété de plaques de fond et d'extensions du marché secondaire disponibles pour les deux. Les générations récentes de chargeurs Glock d'origine à capacité réduite (10 coups) présentent plusieurs différences dimensionnelles qui peuvent interférer avec n'importe quel magazine well, y compris le Magpul GL Enhanced Magazine Well. Certaines grandes plaques de fond du marché secondaire peuvent également causer des interférences.

38.9 EUR 52 38,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: Glock Finition: Noir Modèle: 17

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Le Magpul GL Enhanced Magazine Well est conçu pour les chargeurs Glock d'origine et les chargeurs GL Magpul.
Il peut y avoir des interférences avec les chargeurs Glock de capacité réduite et certains talons de chargeur de grande taille.
Optimisé pour une utilisation avec des extensions et talons de chargeur variés.

Caractéristiques

Fabrication: Glock Finition: Noir Modèle: 17 Poids du colis: 0,027kg Hauteur d'expédition: 159mm Largeur d'expédition: 44mm Longueur d'expédition: 44mm UPC : 840815117520

Détails de l'article

Fabriqué au USA
US export classification: 0A501.y.1

Améliore ton expérience avec le Magpul GL Enhanced Magazine Well pour Glock 17. 🔧 Optimisé pour une utilisation facile et efficace.

Assurez l'insertion du chargeur dans des situations stressantes

Plus...

Ensure Mag Insertion in Stressful Situations

Plus...

Évaluations client de MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK

Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 2,8

Be Careful (02/10/2017)

Will not work if you're using Glock backstraps, unless you are willing to modify.

Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.

DANGER/RIP OFF (30/09/2018)