DLASK ARMSSEMI-AUTO ULTRA-LIGHT TRIGGERS - DLASK ARMS LONG PARA-ORDNANCE TRIGGER
253100010
Caractéristiques
Finition:Argent
Modèle:Commander,Government,Officers
Style:Courbé,Longue,Dur
Type d'arme:1911
Poids du colis:0,009kg
Hauteur d'expédition:25mm
Largeur d'expédition:83mm
Longueur d'expédition:146mm
Détails de l'article
US export classification: 0A501.c
Spécifications:
Fabrication: 1911
Finition: Argent
Modèle: Government, Commander, Officers
Style: Courbé, Longue, Dur
114.9114.91EUR
Sale
103.4EUR103,40 €
114,90 €
Le prix inclut la TVA mais pas la livraison .
Référence: 253100010
N° fabr.: POLT1MG
L'étrier en titane, la semelle en magnésium et l'ajustabilité bidirectionnelle offrent la meilleure combinaison de résistance, de poids réduit et de réponse nette pour un déclencheur ultra-léger de qualité match, sans flexion, prise ou surcourse.
Magnésium & Titane Pour La Résistance; Ajustable Pour La Prise & La Surcourse; Modèles Para-Ord. Aussi
L'étrier en titane, la semelle en magnésium et l'ajustabilité bidirectionnelle offrent la meilleure combinaison de résistance, de poids réduit et de réponse nette pour un déclencheur ultra-léger de qualité match, sans flexion, prise ou surcourse.
SPÉCIFICATIONS : Semelle en magnésium, étrier en titane, finition argentée. Long - 2,335" (5,9 cm).
Magnesium & Titanium For Strength; Adjustable For Take-Up & Overtravel; Para-Ord. Models, Too
Titanium stirrup, magnesium shoe and two-way adjustability provide the best combination of strength, lower weight and crisp feeling response for an ultra-light, match quality trigger pull without flex, take-up or overtravel.
This trigger is super light yet built much stronger than the "K hole" I initially installed. If you are looking for a "drop in trigger" this isn't it. Fitting took over an hour and you will need the Brownells trigger stirrup of something similar. Everything is "oversize" for better fit and the shoe was off axis and canted which took a while to sort out. Once the geometry was correct, fitting was easier. I wound up filing on both sides and top and bottom so refinishing using a blast of baking soda was necessary to bring the finish back. I really like the way this trigger looks but it's not simple project.
Fortement recommandé
great trigger super light 28/08/2014
Para p14 to get rid of plastic lots of grinding on bow but supper tight fit shoe not bad . Hardest part is polishing Inside of frame were bow pushes out all the way down all these metals grab each othere
Recommandé
A little more work 31/08/2012
than I though there woul be. I installed the same trigger in my old Bullseye pistol years ago, with only a little fitting & polishing of the bow needed. This time, I had to trim the shoe for height and width to fit the trigger window and trim & polish the bow to fit the ways. The final adjustment was a little squeeze on the bow for final fitting. Once completed it's slicker than goose-grease!
Fortement recommandé
the best for the money ! 29/07/2012
These can be time consuming to fit , but are worth both the money and the time. You can get rid of all take-up and over-travel and have a crisp, "right there " trigger , I have them in four 1911's and one in a STI 2011. I am very happy with them!!!
Recommandé
My only choice for competition guns 08/05/2012
Yes, it DOES take a lot of work to fit one correctly, but once it's done there's nothing sweeter. I love the rounded feel of the shoe. The doublestack trigger is harder to fit properly than the single stack version but either way it's worth it. Make sure you know what you're doing! I have this trigger in a 1640 with a 1-lb 6-oz pull.
Fortement recommandé
awesome trigger 18/03/2012
love the extreme light weight. adjustment tabs make fitting easy. best trigger ever for the Para wide body.
Fortement recommandé
The best trigger for my builds 13/01/2011
This is the best competition trigger and my customers ask for it by name. I use the Dlask trigger whenever the finished product has to be a fine racegun used in competitions. It's of incredibly light weight and it allows for very minute adjustments. Yes, it requires fitting by a gunsmith who knows what he's doing, but the final result is worth the price of the trigger and labour.
Moyennement recommandé
Not satisfied 25/12/2010
Loose fit on the bow side to side in the frame. The front tabs on the bow were not large enough to provide any custom fitting. The Shoe required extensive fitting.
Non recommandé
Needs LOTS of fitting 28/10/2010
My gunsmith hated putting this in a para p14. Fit was awful and the final product isnt what it should be for the price. Next project gets a GunWorks trigger.
Non recommandé
Overpriced and not functional 15/10/2010
Bought this trigger thinking that if I spent the kind of money Dlask is asking, that I should get a decent trigger. I was wrong. I had a gunsmith fit it and work on it to begin with. It felt like it was full of gravel and was way worse than stock. He said it was due to the materials in the trigger. I have since put about 8 man hours into polishing every part on my Para that the trigger touches, and polishing the bow and shoe. Still feels like its got gravel in it. In fact its so bad my trigger finger gets tired after shooting the gun. It seems like everything I do to this trigger makes it worse. [...]Its ridiculous.The Gun Craft trigger I had before was much better and I wish I would have kept that one..
Fortement recommandé
Worth every penny! 06/08/2010
This trigger dropped right in my Citadel Compact 45. Very light trigger with easy adjustments. I have no play in the trigger, just click-bang. Looks great and worth every penny in my opinion. This trigger is unique. I love it!
Non recommandé
Not sure 16/04/2010
I bought on for my P14-45 and my P16-40. For some reason, the one in the 16-40 corroded and not needs to be replaced. The one in the 14-45 seems fine. Don't know why one "behaved" and the other didn't, but I'd advise sticking with aluminum.
Fortement recommandé
not for idiots 29/03/2010
I love it when non gunsmiths whine because their custom fit parts dont jump off the ups truck and install themselves.I have used this trigger in three different pistols of my own and installed it on a dozen more trigger jobs, it has been flawless every time. yes it requires fitting, (that means it is oversized, it is really hard to make a part bigger if it is undersized) but it is a very nice trigger if you know what you are doing, and if you don't, dont try and do a trigger rplacement with this or any trigger.
Fortement recommandé
Great Trigger 27/11/2009
Exactly what I was shopping for to fit into a Gold Cup frame and a Series 70 Govt frame. Yes like the previous comment says you need to hand fit this trigger, it is not a drop in and go but if you want the perfection of a fitted trigger this is the way to go. The only negative I have on it is that the finish on the "finger" side will smooth down and change texture and look.
Non recommandé
Don't waste your time 25/08/2009
I was looking for something different for my custom Colt, I saw this and like the looks, I purchased the product and when I went to install, it would not fit. The shoe was to wide; as well as, the trigger was too tall and wide. I realize that some fitting is required but this trigger required too much and for the price you think it would be a little more too tolerance. Don't waste your time with product.
Opérateur économique responsable conformément au règlement de l'UE
Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr
Derniers visualisés
Oups ! Quelque chose s’est mal passé.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Le connecteur en acier inoxydable améliore la précision en réduisant la course de la détente.
Il réduit le poids de la course à 3,5 livres et empêche le surcourse après la chute du percuteur.
Compatible avec tous les modèles sauf Glock 42 ou 43, chaque connecteur nécessite un ajustement mineur.
Les poignées Hogue pour le 1911 Auto offrent un meilleur contrôle du recul grâce à leur design ergonomique.
Fabriquées en bois dur et en caoutchouc moulé, elles sont conçues pour absorber le choc et réduire le recul.
Leur finition antidérapante avec texture de galets assure une prise solide et confortable.
Fabriqué avec du fil de chrome silicon ou de l'acier à haute teneur en carbone pour une performance optimale.
Testé et garanti pour offrir une pression uniforme et un déplacement correct.
Idéal pour des travaux de détente de qualité match légers sur les modèles 1911 : Government, Commander, Officers.
L'éperon rainuré offre une prise antidérapante et confortable.
Le trou de la tige du marteau réduit la pression du ressort pour un tir plus léger.
Compatible avec les séries 70 et 80, mais nécessite un travail de gunsmithing.
Le Lewis Lead Remover est très efficace pour enlever les résidus de plomb sans endommager votre arme.
Il est recommandé par les meilleurs tireurs du pays pour maintenir la précision de votre pistolet.
Utilisez-le avec le nettoyant de canon J-B pour un nettoyage optimal et un canon sans plomb !