Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

DAVID TUBB
M14 & M1A SEMI-AUTO CHROME SILICON RIFLE SPRINGS

840000037

Performance Stable Pour 500 000 Cycles de Compression

Le kit de ressorts au chrome silicone, au poids d'origine, restaure une fonction fiable et une performance durable pour le M1A et le M14. Le ressort de tige d'opération aide à garantir un cycle cohérent ; le ressort de marteau offre un engagement répétable de la gâchette pour un déclenchement net.

SPÉCIFICATIONS : Acier au chrome silicone. Ressort de tige d'opération - 15-3⁄4" (40cm) de long. Ressort de marteau - 2-1⁄4" (5.7cm) de long. Compatible avec M1A et M14.

Plus...

Stable Performance For 500,000 Compression Cycles

Factory weight, chrome silicon spring kit restores reliable function and long-lasting performance to the M1A and M14. Op rod spring helps ensures consistent cycling; hammer spring gives repeatable sear engagement for a clean breaking trigger.

SPECS: Chrome silicon steel. Op Rod Spring - 15-3⁄4" (40cm) long. Hammer Spring - 2-1⁄4" (5.7cm) long. Fits M1A and M14.

Plus...

Évaluations client de DAVID TUBB M1A OP ROD/HAMMER SPRING SET

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4

Great Set of Springs (23/06/2010)

These springs were high quality and worked well in replacing stock Springfield Springs. You might as well get the Sadlak Match Op Rod Guide while you are at it. It is round as opposed to flat metal and keeps the spring from kinking.

No for a M1 Garand (15/10/2010)

I purchased 3 sets of these for rebuilding CMP Garands.I found the Op Rod springs to have the wrong tension as none of the 3 worked in any combination in even my already function M1 Garands.Instead I installed new Mil Spec springs.They worked fine right out of the Mailbox.[...]

I'll have to try it out. (25/10/2010)

I just did a review that it's not for the Garand, but the small print says " - also fits M1 Garand rifles". David Tubb put his name on it so I will give it a try in my Garand.

These are not for Garand (31/03/2011)

Despite what the copy says, these springs are for the M14 and M1A rifles, not for the M1 Garand.

Could someone at Brownells please correct the copy, removing the references to "M1" and "Garand"?

Repeat, the M1A/M14 takes a different op rod spring from the M1 Garand.

A must have (10/03/2013)

Ive used several different recoil springs in my M14 and there are several better choices over the stock spring available. The Tubbs springs are a little more expensive than some others out there, but I have not found anything that performed better than these recoil springs.
Ive found the use of this spring, along with a Sadlak recoil spring guide to significantly improve the performance of a M14/M1A.

Great product, smooth function (01/03/2014)

Fits and works well. The hammer spring is a bit harder to install, but doable. Not sure where people mistakenly think this works on a Garand, perhaps Brownells corrected the description? Yes, they make one for the M1 Garand, but a completely different part number. This is only for the M14/M1A.

If you have an M1A, you need to upgrade to these springs.

Great upgrade (27/02/2015)

A great set of springs especially when paired with a Sadlak national match spring guide. Do your M1A a favor and pick these up. Greatly improved cycling, nice and smooth.

Lire 7 plus d'avis sur brownells.com

0 0 1 EUR

Référence: 840000037
DAVID TUBB M1A OP ROD/HAMMER SPRING SET
Ref Fabricant: CSM1A Le kit de ressorts au chrome silicone, au poids d'origine, restaure une fonction fiable et une performance durable pour le M1A et le M14. Le ressort de tige d'opération aide à garantir un cycle cohérent ; le ressort de marteau offre un engagement répétable de la gâchette pour un déclenchement net.

Avertir lorsque l'article est disponible

Pas disponible.

Caractéristiques: Fabrication: Springfield Modèle: M1 Garand

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Restaure la fonction fiable et la performance durable pour les M1A et M14.
Le ressort de tige d'opération assure un cycle cohérent.
Le ressort de marteau offre un engagement de détente répétable pour une gâchette précise.

Caractéristiques

Fabrication: Springfield Modèle: M1 Garand Poids du colis: 0,045kg Hauteur d'expédition: 4mm Largeur d'expédition: 118mm Longueur d'expédition: 196mm

Détails de l'article

Fabriqué au USA

Améliorez votre M1A ou M14 avec le kit de ressorts au chrome silicone de David Tubb. 🔧 Performance fiable et déclenchement net à chaque tir!

Performance Stable Pour 500 000 Cycles de Compression

SPÉCIFICATIONS : Acier au chrome silicone. Ressort de tige d'opération - 15-3⁄4" (40cm) de long. Ressort de marteau - 2-1⁄4" (5.7cm) de long. Compatible avec M1A et M14.

Plus...

Stable Performance For 500,000 Compression Cycles

SPECS: Chrome silicon steel. Op Rod Spring - 15-3⁄4" (40cm) long. Hammer Spring - 2-1⁄4" (5.7cm) long. Fits M1A and M14.

Plus...

Évaluations client de DAVID TUBB M1A OP ROD/HAMMER SPRING SET

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4

Great Set of Springs (23/06/2010)

No for a M1 Garand (15/10/2010)

I'll have to try it out. (25/10/2010)

I just did a review that it's not for the Garand, but the small print says " - also fits M1 Garand rifles". David Tubb put his name on it so I will give it a try in my Garand.

These are not for Garand (31/03/2011)

A must have (10/03/2013)

Great product, smooth function (01/03/2014)

Great upgrade (27/02/2015)

A great set of springs especially when paired with a Sadlak national match spring guide. Do your M1A a favor and pick these up. Greatly improved cycling, nice and smooth.

Lire 7 plus d'avis sur brownells.com