Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

YANKEE HILL MACHINE CO., INC.
PICATINNY BIPOD ADAPTER

100002072

Plateforme Solide Pour Fixation de Bipied

Ce design léger et épuré élimine l'apparence encombrante qui accompagne la tentative de fixer un bipied à un garde-main AR-15/M16. La plateforme robuste en aluminium avec un point d'attache fixe offre un ajustement supérieur aux rails d'accessoires Weaver ou Picatinny. Deux boulons à tête hexagonale fournissent une pression de serrage uniforme, garantissant que l'adaptateur reste parfaitement stable lors du tir. Spécialement conçu pour accepter les bipieds Harris et similaires qui se fixent à un point d'attache pivotant.

SPÉCIFICATIONS : Aluminium de qualité aéronautique, anodisé dur, finition noire mate. Longueur de 2-5/8" (6,7 cm), largeur de 1¼" (3,2 cm), hauteur de 5/8" (1,6 cm). Poids de 2,2 oz. (62 g).

Plus...

Rock Solid Platform For Bipod Attachment

Lightweight, slimline design eliminates the clunky extra baggage look that goes along with trying to mate a bipod to a AR-15/M16 handguard. The rugged, aluminum platform with fixed attachment stud provides a superior fit to Weaver or Picatinny, accessory rails. Two hex-head crossbolts give uniform clamping pressure, so adapter remains rock solid while shooting. Specifically contoured to accept Harris and similar bipods that attach to a swivel stud.

SPECS: Aircraft-grade aluminum, hardcoat anodized, matte black finish. 2-5/8" (6.7cm) long, 1¼" (3.2cm) wide, 5/8" (1.6cm) high. 2.2 oz. (62g) wt.

Plus...

Évaluations client de YANKEE HILL MACHINE CO., INC. PICATINNY BIPOD ADAPTER

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3,4

Bipod mount/ sling mount (09/11/2009)

Very solid steel mount that has double cross bars.
Heavier than others and takes up more space.

Yankee Hill Bipod Adapter (08/04/2010)

I use this to hold my Harris bipod to my M&P 15-22. This is a once piece clamping design that I was not able to loosen enough to slide the adapter onto the rail from the side so one has to slip it on from the end. This is its only limitation. It is well made, clamps tightly, works well in holding my Harris bipod solidly to the forerail and is of good quality manufacturing. It has two screw tighening which was important to me. I did not feel one screw was enough.

Not on just any rail (16/02/2011)

I like the idea of the product. Its solid if it can go on. I put it on a cheap plastic rail. I finally got around to free floating my AR with a YHM free float rail, yeah it does fit on its own rail products. It is possible putting it on the cheap rail cinch it down making it impossible to install on the aluminum one later, but I doubt it.

The perfect match for Harris bipod (04/10/2011)

The YHM bipod adapter is perfectly tailored for the Harris bipod. The swivel stud that connects to the bipod is precisely located to center the base of the bipod when installed. Similar accessories has their stud located at the center of the adapter offsetting the position of the bipod when installed. This is a minor flaw and in no way affects the operation of the bipod. It does however affects the overall aesthetics. It goes to show that YHM did their homework when they designed this gadget. Great job, great price. Higly recommended. A QD version will be a great addition to this line up.

I WOULD BUY THIS UNIT AGAIN. (08/01/2012)

UNIT IS EXACTLY AS STATED, A BREEZE TO INSTALL AND THE MENTIONED OFF SET FIT PERFECTLY ON MY ARMALITE .308

Did Not Fit My Picatinny Rail (04/04/2012)

This is a solidly made adapter milled out of a single piece of aluminum. It does not have a separate clamping bar, but appears to depend on a cut halfway through the adapter to give some "spring" to one side. However, it can't really be spread apart. It can not be installed by rotating it from the side over the rail, and it was too narrow to slide onto my rail from the end.

I am returning this product for another after I talk to a Brownell's technician.

TIGHT FIT (10/01/2015)

some rails this slides right on. the last rail I put it on had to use a plastic mallet to send it home. I don't have a problem doing this. I rather have it on the tight side than be loose.

Lire 7 plus d'avis sur brownells.com

39.9 39.9 1 EUR

Référence: 100002072
YANKEE HILL MACHINE CO., INC. PICATINNY BIPOD ADAPTER
Ref Fabricant: YHM-638 Ce design léger et épuré élimine l'apparence encombrante qui accompagne la tentative de fixer un bipied à un garde-main AR-15/M16. La plateforme robuste en aluminium avec un point d'attache fixe offre un ajustement supérieur aux rails d'accessoires Weaver ou Picatinny. Deux boulons à tête hexagonale fournissent une pression de serrage uniforme, garantissant que l'adaptateur reste parfaitement stable lors du tir. Spécialement conçu pour accepter les bipieds Harris et similaires qui se fixent à un point d'attache pivotant.

39.9 EUR 0 39,90 € *

Pas disponible.

Caractéristiques: Attache : Picatinny Utilisation: Swivel Stud Mount

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Conception légère et profilée pour un montage facile sur un garde-main AR-15/M16.
Fabriqué en aluminium de qualité aéronautique avec un point de fixation fixe pour une stabilité accrue.
Compatible avec les bipieds Harris et similaires, offrant un ajustement parfait sur les rails Picatinny.

Caractéristiques

Attache : Picatinny Utilisation: Swivel Stud Mount Poids du colis: 0,068kg Hauteur d'expédition: 13mm Largeur d'expédition: 25mm Longueur d'expédition: 86mm

Détails de l'article

Fabriqué au USA

Opérateur économique responsable conformément au règlement de l'UE

Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr

Transforme ton AR-15 avec l'adaptateur Picatinny léger et robuste de Yankee Hill! 🔧 Parfait pour les bipieds Harris et similaires.

Plateforme Solide Pour Fixation de Bipied

SPÉCIFICATIONS : Aluminium de qualité aéronautique, anodisé dur, finition noire mate. Longueur de 2-5/8" (6,7 cm), largeur de 1¼" (3,2 cm), hauteur de 5/8" (1,6 cm). Poids de 2,2 oz. (62 g).

Plus...

Rock Solid Platform For Bipod Attachment

SPECS: Aircraft-grade aluminum, hardcoat anodized, matte black finish. 2-5/8" (6.7cm) long, 1¼" (3.2cm) wide, 5/8" (1.6cm) high. 2.2 oz. (62g) wt.

Plus...

Évaluations client de YANKEE HILL MACHINE CO., INC. PICATINNY BIPOD ADAPTER

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3,4

Bipod mount/ sling mount (09/11/2009)

Very solid steel mount that has double cross bars.
Heavier than others and takes up more space.

Yankee Hill Bipod Adapter (08/04/2010)

Not on just any rail (16/02/2011)

The perfect match for Harris bipod (04/10/2011)

I WOULD BUY THIS UNIT AGAIN. (08/01/2012)

UNIT IS EXACTLY AS STATED, A BREEZE TO INSTALL AND THE MENTIONED OFF SET FIT PERFECTLY ON MY ARMALITE .308

Did Not Fit My Picatinny Rail (04/04/2012)

TIGHT FIT (10/01/2015)

some rails this slides right on. the last rail I put it on had to use a plastic mallet to send it home. I don't have a problem doing this. I rather have it on the tight side than be loose.

Lire 7 plus d'avis sur brownells.com