Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

CLYMER
RIMLESS RIFLE CHAMBERING REAMERS

184050200

Meilleur savoir-faire & qualité ; Fabriqué aux États-Unis à partir d'acier M-7 à haute vitesse

Fabriqués par Clymer, un groupe véritablement dévoué aux armes à feu, à partir de l'acier M-7 à haute vitesse de la meilleure qualité. Ce sont des outils de précision pour le gunsmith professionnel et ils offriront une durée de service à vie lorsqu'ils sont correctement entretenus. Entièrement garantis. Les Roughers sont .010" plus petits en diamètre que la taille finale, ne coupent pas la zone de gorge et doivent être utilisés pour éviter l'usure sur le Finish Reamer lorsque de nombreuses chambres doivent être usinées. Si seules quelques chambres doivent être usinées, un Finish Reamer est tout ce dont tu as besoin. Reamers de qualité supérieure fabriqués selon les spécifications SAAMI.

Remarque : Si vous ne voyez pas le calibre que vous recherchez ci-dessous, n'hésitez pas à contacter notre Service des Commandes Spéciales, car de nombreux articles supplémentaires sont disponibles chez Clymer.

SPÉCIFICATIONS : REAMERS DE FUSIL - 6, coupe à droite, flûtes droites. Pilote solide, gorge intégrale. Disponibles en Rougher et Finisher. Tige ronde de 7/16" avec entraînement carré de 3/8". Tige ronde de ¼" sur .22 RF. COMMANDE : Indiquez : 1) Référence. 2) Calibre de la cartouche et nom.

Plus...

Finest Workmanship & Quality; Made In USA From M-7 High Speed Steel

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.

Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.

SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

Plus...

Évaluations client de CLYMER 257 ROBERTS FINISHING REAMER

Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 3,7

Works well (11/06/2011)

Using the methods outlined in Sweeney's AR-15 Gunsmithing volume, and lubed with Do-Drill, I was able to adjust the headspace on a new, non-chromed barrel. Less than a half-dozen turns brought the chamber to the point where the stripped bolt would just close on a Clymer GO gauge. With the gauge then lengthened by .003" using a piece of tape, I further adjusted the headspace with an additional 3/4 turn of the reamer. Now the bolt closes on the lengthened gauge but not on a NO-GO gauge. This should produce an accurate rifle.

Beautiful finishing reamer (30/04/2015)

Leaves a great finish, spec's out perfectly, and is a great value for the money.

Sharp as a razor (11/05/2015)

I used this to hand ream a short chambered barrel there was no chatter what-so-ever and the chamber was left with a mirror-like finish. I used plain ATF to lubricate this reamer and it worked great. It finished the chamber in 4 or 5 passes.

Good reamer (01/12/2013)

I heard bad things about Clymer reamers, but wasn't disappointed. Cut the chamber smooth and chatter free. I am happy.

Chatter (27/09/2010)

Clymer reamers have become notorious for chatter lately. I have had a couple that chattered, and several of my Gunsmith colleagues have had the same thing. I would not recommend the reamers by this company, as their quality has gone downhill in the past few years. My reamer chattered so bad so fast that the chamber was almost not salvageable.

Excessive chatter (12/09/2009)

Having used Clymer reramers in the past, I expected no problems. When I used this reamer it started to chatter immediately. Regardless of lathe speed or feed rate I was unable to eliminate the chatter. Thanks to the folks at Brownells, I was not stuck with this poorly made tool. I will continue to use Clymer reamers in the future, which I already have, but will think twice before buying another one.

CLYMER REAMER in .243 Winchester (14/10/2017)

If It works as intended, I shall be able to close my Remington 700 bolt with a cartridge in place with ease. My new Shilen 26" Chrome-Moly barrel with 1 in 10" twist is beautiful and almost ready to lock-and-load. So, I will inform you soon as to how the reamer performed. My main bullets are: Hornaday 75 grain V-Max and Swift Scirocco II 90 grain Bonded. I have no images yet, because I am not ready to disclose my findings. Cliffy

not worth spending the money on (04/03/2010)

Bought Clymer reamer because of reputation - MISTAKE. Even with a floating reamer holder, I couldn't make it stop chattering. Had to set barrel back & start over with another brand of reamer (worked great)

.223 reamer...finishing (08/06/2011)

This was used to extend the life of AR15 barrels that were getting a little long in the throat. The barrel extension is removed, 0.062 removed from the barrel shoulder (one thread) and the reamer is used to deepen the chamber 0.060. A "shot out" Krieger and a RR barrel were renewed and their usable lives were extended by a 2-3 thousand rounds.

Lire 9 plus d'avis sur brownells.com

164.9 254.9 30 EUR

Référence: 184050200
CLYMER 257 ROBERTS FINISHING REAMER
Ref Fabricant: F257ROB Fabriqués par Clymer, un groupe véritablement dévoué aux armes à feu, à partir de l'acier M-7 à haute vitesse de la meilleure qualité. Ce sont des outils de précision pour le gunsmith professionnel et ils offriront une durée de service à vie lorsqu'ils sont correctement entretenus. Entièrement garantis. Les Roughers sont .010" plus petits en diamètre que la taille finale, ne coupent pas la zone de gorge et doivent être utilisés pour éviter l'usure sur le Finish Reamer lorsque de nombreuses chambres doivent être usinées. Si seules quelques chambres doivent être usinées, un Finish Reamer est tout ce dont tu as besoin. Reamers de qualité supérieure fabriqués selon les spécifications SAAMI.

209.9 EUR 2 209,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Cartouche: 257 Roberts Style: A Gorge Arme d'Epaule

CLYMER RIMLESS RIFLE CHAMBERING REAMERS

Évaluations client de CLYMER 257 ROBERTS FINISHING REAMER

Points forts

Caractéristiques

Détails de l'article

Évaluations client de CLYMER 257 ROBERTS FINISHING REAMER

Se connecter

Méthodes de paiement sécurisées

Associations professionnelles

Bienvenue !

CLYMER
RIMLESS RIFLE CHAMBERING REAMERS