Fabriqué au USA
US export classification: 0A501.y.1
Spécifications:
Calibre: Calibre 12
Couleur: Matte Noir
Fabrication: Remington
Matériau: Fiberglass
Modèle: 1100
79.979.91EUR
79.9EUR79,90 €
Le prix inclut la TVA mais pas la livraison .
Référence: 159101110
N° fabr.: 1/2/2012
Les forends s'effilent légèrement pour une prise naturelle ; le forend Remington 1100 est rainuré et ressemble au forend d'origine. Inclus : un œillet pour sangle.
Bientôt disponible
En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
Les forends s'effilent légèrement pour une prise naturelle ; le forend Remington 1100 est rainuré et ressemble au forend d'origine. Inclus : un œillet pour sangle.
SPÉCIFICATIONS : Fibre de verre, finition noire mate. Forend 1100 - 11" (27,9 cm) de long, 1,825" (4,7 cm) de diamètre, poids de 8 oz. (227 g).
Weatherproof Choice Of Law Enforcement Agencies
Forends taper slightly for a natural hold; Remington 1100 Forend is checkered and is similar to the factory forend. Includes sling swivel stud.
SPECS: Fiberglass, black matte finish. 1100 Forend - 11" (27.9cm) long, 1.825" (4.7cm) diameter, 8 oz. (227 g) wt.
Caractéristiques
Calibre:Calibre 12
Couleur:Matte Noir
Matériau:Fiberglass
Modèle:1100
Type d'arme:Remington
Poids du colis:0,204kg
Hauteur d'expédition:51mm
Largeur d'expédition:38mm
Longueur d'expédition:290mm
Détails de l'article
Fabriqué au USA
US export classification: 0A501.y.1
Avis des clients
Notes des clients (6)
4,7 / 5
Recommandé
Almost returned this item. Glad I didn't 29/10/2013
I purchased this as a replacement forend for an 11-87 Police in order to have the clearance needed to mount a sidesaddle shell holder on the receiver(factory forend would not permit this without modification). Initially, I did not think the Choate forend would fit after it became jammed during installation. Once I got it back off the assembly, I discovered the Gas Cylinder Collar (GCC) was stuck hard in the forend and would not fully seat. I had this forend boxed up and ready to return to Brownells when I started reading some Internet discussion regarding the purpose of the GCC and what guns require it and what guns do not. After further research and observation, I concluded that MY particular 11-87P did NOT require the use of the GCC. Omitting that part allowed the Choate forearm to fit perfectly. In addition, while my gun previously had a fair amount of wiggle and play between the forend, the barrel and the receiver (annoying but it didn't seem to affect operation) the Choate forend has eliminated that play and the gun feels much more solid in my hands. Forty rounds of heavy 00 Buck (9 pellets @ 1300fps) and a disassembly confirmed that everything was running better than ever WITH the Choate forend and WITHOUT the GCC. I gave this product 4* because it did not come with any installation instructions regarding the use of the GCC and the fact that it would not fit. DISCLAIMER- I am not a gunsmith and I am not advising ANYBODY to omit factory parts on THEIR 11-87 Police until they are certain of the consequences. A few sidenotes: The Choate forend has a much more aggressive texture than the Remington factory synthetic forend. The Choate forend DOES NOT comes with a sling swivel mount as indicated in the product description. It DOES allow the use of "sidesaddle" attachments to the receiver as it does not overlap onto the receiver as far back as the factory forend. The Choate forend does NOT have the ball detent found on many factory forends.
Fortement recommandé
Nice product 07/03/2012
The Choate forend is a well made product. And at half the price of a Mossberg poly one or other aftermarket forends, the price cant be beat.I have big hands and the forend is very comfortable. I have had other brand forends on my Mossy 500, including the stock wood and other poly forends, including a pistol grip forend. I must say this one is my favorite. Shipping was fast, the Choate forend came with a tool to use to change it. Thank you Brownells and Choate.
Fortement recommandé
Info for 500 short slide and early 500A 07/03/2012
This forend is for the 7 3/4 slide, but will work on the shorter 6 3/4 with just 2-3 minutes work. First, get the Hogue 835 slide adapter nut for 9.99, hunt up a 1 1/4 holesaw, mount it in a drill press and drill hole deeper. its that simple. Saves buying the 60.00 long action slide kit. Hope it helps.
Recommandé
nice for small hands but....... 09/08/2011
this thing is nice and slim and would work well for small hands but its small size lends the opportunity for one to burn their fingers on a hot barrel during defensive and stress fire conditions
Fortement recommandé
Great product 03/06/2011
I like this fore end. It has heavy texture, and will give you an excellent grip, even in cold wet conditions. The other nice thing is that is doesn't overlap the receiver so most aftermarket side saddles will fit without any modification.
Fortement recommandé
Nice 20/07/2010
Hardest part of this is getting the old forend off, the tool is included, I had a hard time loosening my old one so I ran soapy water in the tube and hit it with a rubber mallet gently and it popped of after drying it and oiling thouroughly I put on new forearm great low profile and tight fit slicks up the gun nicely
Opérateur économique responsable conformément au règlement de l'UE
Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr
Derniers visualisés
Oups ! Quelque chose s’est mal passé.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.
Améliore ton Remington 1100 avec le forend en fiberglass Choate. Prise naturelle et style élégant. 🛠️ Parfait pour le tir sportif!
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Les crosses en plastique renforcées de fibre de verre sont robustes et résistent à l'usure.
Longueur de tirage ajustable entre 13", 13½" et 14" grâce à deux cales incluses.
Comprend une poignée pistolet pour une prise naturelle et un point d'attache pour bretelle.
Montage arrière pour fusils Remington 870, 1100 et 11-87, conçu pour un accès rapide à la sangle.
Compatible avec des sangles jusqu'à 1¼" de large et différentes attaches rapides.
Usiné en aluminium anodisé noir mat pour une durabilité accrue.
Les vis de stock standard sont bien fabriquées et finies, disponibles en sets de 4 vis.
Les vis en acier inoxydable (S/S) sont parfaites pour les armes en acier inoxydable et nickelées.
Compatible avec les modèles 1911 Government, Commander et Officers.
La taille accrue te permet d'actionner la culasse avec ta main non dominante sans perdre ta position de tir.
Offre un levier supplémentaire pour dégager une chambre enrayée rapidement.
Facile à installer, sans modification nécessaire de l'arme, et convient uniquement pour Remington 1100 et 11-87.
Ajoute 2 cartouches supplémentaires à votre Remington 870/1100/11-87 en un rien de temps.
Installation rapide et facile avec un tube fileté remplaçant la vis du bouchon du magasin.
Inclut un collier de fixation pour un soutien supplémentaire et un point de montage pour la sangle.