Te donne une capacité de chargeur supplémentaire en seulement une minute. Rapide et simple à installer et à retirer. Le tube fileté remplace la vis du capuchon du chargeur. Parfait pour les événements de tir d'action avec fusil ou pour les forces de l'ordre. Le collier de fixation pour sangle (inclus uniquement sur les modèles Remington) sécurise l'extension au canon pour un soutien supplémentaire. Offre un point de montage pratique à l'avant pour une sangle ou un strap. Le collier de fixation pour sangle est également disponible séparément.
SPECIFICATIONS : Extension - Acier, finition mate. 12 ga. uniquement. Inclut un ressort prolongé, un suiveur et un collier de fixation. Collier de fixation pour sangle - Acier bleu ou parkérisé, anneaux de sangle de 1" à l'avant et à l'arrière avec goujons. Le tableau indique le nombre de ROUNDS (RDS) en plus de la capacité du chargeur d'origine pour chaque modèle. 20ga. Rem. convient uniquement aux armes de petit cadre 20ga. et toutes les indentations sur le tube du chargeur devront être enlevées pour un bon fonctionnement. * 11-87 nécessite des modifications.
Plus...
Screw-On Tubes For Increased Capacity
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately.
SPECS: Extension - Steel, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp - Blued or parkerized steel, front and rear 1" swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory magazine capacity for each model. 20ga. Rem. fits small frame 20ga. guns only and any indentions on the magazine tube with have to be removed for proper functioning. * 11-87 requires modifications.
Plus...
Évaluations client de CHOATE REMINGTON 870/1100/11-87 3 ROUND EXTENSION
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4,6
Awesome addition to my 28" Wingmaster(04/09/2014)
I scored a 1958 Wingmaster in near mint condition from a pawn shop for next to nothing, then sold the original forend and stock off of it to finance this extension, a new forend tube, Magpul forend, Vang Comp follower, ATI polymer mag tube clamp, and a Remington polymer thumbhole stock. After all was said and done, I ended up paying less than $100 for an awesome gun that points amazingly well, even when loaded with 10 rounds of #1 buck. It's my tactical long-barrel shotgun! My friends get a kick out of it and it's still a beautiful gun, even without the original walnut furniture. Anyway, I went with the Choate because of the price and capacity and ended up really liking it. It's bluing matches well with the barrel and receiver of the old gun. It's functioned with 100% reliability through hundreds (I would estimate around 700) of rounds of mixed buck, slugs, and field loads and it still looks new! My other 870 is an 18" original Express (metal trigger guard, machined internals) that has a Nordic tube with an XL cap that sits flush with the barrel and allows me to load 7 in the mag. ...and while I love it, I paid a lot for the setup - this was way more economical. I only wish they made a +6 or +7. I still have barrel sticking out! Thanks Choate!
build it like you want it and save!(15/09/2009)
currently have this on my Rem 870 for house protection. i really like this one and it saved me alot of money. i purchased a used 870 with an 18 barrel for $150 and added this product to it. a tactial remington with the factory extension would cost $450 to $599. the money i saved went in the till for some shot shells. i mean alot of shells.
4 round extension installed on model 870(09/01/2017)
Purchased this so I could better use my 870 in some 3 gun matches. Gives me a total of 8 rounds in the magazine. Looks to be quality product. Note that my model 870, a turkey model with 21" barrel, had tabs inside the factory magazine tube which I had to use my dremel tool and grind down the two tabs so that shells and the follower could slide up into the extension. Just took a few minutes, but just be aware that some gunsmith work might be required depending on your model 870. My barrel is 21", but with the full choke screwed in, that extends another 1". This puts my barrel at 22" and exactly even with the extension tube end.
Choate Magazine Extension(06/03/2010)
A well manufactured piece. The fit and fnish were nice and the parkerizing was well done. The installation required a little work with a metal file as simply using a 3/16" bit to remove the dimples in my rem 870 magazine tube was not sufficient to allow the plug which came with the extension to smoothly pass through the tube where the dimples were drilled out. After working it a little bit with the file, it functioned smoothly.
Works like it's supposed to!(18/07/2010)
Used this product for a build of my 1100 for social use. Very durable item with the barrel brace and high visibility orange follower. You can't go wrong with this.
Choate Magazine Extension(25/06/2016)
I wanted to extend the factory magazine tube on my 870 Express. It is being set up primarily for home defense but is also used for fun shooting. I went with the 3 round extension as didn't see a need at this time for more.
I had a local gun smith properly remove the dimples. Once installed shells cycled smoothly. I liked the dull coating as it matches both my barrels. The brace will keep the tube extension lined up and also from working free.
About the only con is the length of the spring. It was a bit of a struggle getting it all together and odds are I may shorten it by a few coils down the road. I'm able to get 7+1 of 2 3/4" double ott buck shells into the gun.
Would buy again(17/10/2009)
Two round parkerized model extends the mag tube to exactly the same length as an 18" factory Remington barrel. Finish is a good match for Remingtons express model finish. Very strong spring, function is perfect.
Excellent choice!(08/04/2013)
Very well constructed magazine extension. This is the best one that we have found by far. Finish is a very deep black, but is not parkerized as the description implies. It is some kind of bake on finish. This is not a drawback as it is a durable finish, but should be correctly disclosed.
As a gunsmith, I have installed a number of magazine extensions from various manufacturers and they tend to come off during use. This is not the case with this extension. It would be near impossible to remove this inadvertently. Buy this with confidence!
Awesome Quality(11/04/2013)
I am a gun enthusiast and am very familiar with shotguns. I switched from 20" barrel to 18.5" Police barrel. I needed a shorter mag extention. I went with the Choate 2 round b/c of their quality and reliability. It comes with an extremely durable Parkerized finish. It also mounts securely to the stock mag and mates up well. This comes with a barrel clamp/sling swivel, and a very long spring. I just used the spring from my previous 3 rd mag ext, perfict fit. Otherwise you will have to trim the spring down to the appropraite length (watch video). I would recommend this to anyone.
spring sucks, don't buy(18/09/2017)
The spring was insanely long and had to be cut down. I cut it down little by little and tried it again after every cut and it still does not work well. The spring is now as short as it can be and still offer some amount of pressure on the follower and it still will not fit the +2 shells that it says it will. It will fit one extra but the spring binds up and does not feed reliably at all. This has been really disappointing. I am going to try to keep the tube itself and find a replacement spring. I will not be buying from this company again. This has been a lot of work trying to fit this thing and it still does not work. It only managed to get 2 stars because it at least looks nice...but looks don't do me any good.
It is a very nice 870 addition (18/12/2017)
Fit and finish are both great. I also found this very nice aluminum magazine / barrel clamp - part # 100-003-182
BCTXX1200 - CLAMP WITH TAC RAIL
at Brownell's that includes a rail section to add a light or laser. Very cool add on for my tactical 870. Looks awesome. As for the factory dimples in the stock mag, a Dremel tool and sandpaper drum made short work of any follower obstructions. The 870 cycles all 6 rounds nice and smooth. Make sure that you stuff a paper towel down the primary mag between the receiver and the dimples before you start grinding, to keep the abrasive crud out if the works. I also put a few small dabs of grease where the paint was ground off. May repaint later. we'll see,
Référence: 159104873 CHOATE REMINGTON 870/1100/11-87 3 ROUND EXTENSION Ref Fabricant: 1/4/2007 Te donne une capacité de chargeur supplémentaire en seulement une minute. Rapide et simple à installer et à retirer. Le tube fileté remplace la vis du capuchon du chargeur. Parfait pour les événements de tir d'action avec fusil ou pour les forces de l'ordre. Le collier de fixation pour sangle (inclus uniquement sur les modèles Remington) sécurise l'extension au canon pour un soutien supplémentaire. Offre un point de montage pratique à l'avant pour une sangle ou un strap. Le collier de fixation pour sangle est également disponible séparément.
Fabriqué au USA
US export classification: 0A502
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 159104872 CHOATE REMINGTON 870/1100/11-87 2 ROUND EXTENSION Ref Fabricant: 1/4/2006 Te donne une capacité de chargeur supplémentaire en seulement une minute. Rapide et simple à installer et à retirer. Le tube fileté remplace la vis du capuchon du chargeur. Parfait pour les événements de tir d'action avec fusil ou pour les forces de l'ordre. Le collier de fixation pour sangle (inclus uniquement sur les modèles Remington) sécurise l'extension au canon pour un soutien supplémentaire. Offre un point de montage pratique à l'avant pour une sangle ou un strap. Le collier de fixation pour sangle est également disponible séparément.
94.9EUR094,90 €
*
En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.
Te donne une capacité de chargeur supplémentaire en seulement une minute. Rapide et simple à installer et à retirer. Le tube fileté remplace la vis du capuchon du chargeur. Parfait pour les événements de tir d'action avec fusil ou pour les forces de l'ordre. Le collier de fixation pour sangle (inclus uniquement sur les modèles Remington) sécurise l'extension au canon pour un soutien supplémentaire. Offre un point de montage pratique à l'avant pour une sangle ou un strap. Le collier de fixation pour sangle est également disponible séparément.
SPECIFICATIONS : Extension - Acier, finition mate. 12 ga. uniquement. Inclut un ressort prolongé, un suiveur et un collier de fixation. Collier de fixation pour sangle - Acier bleu ou parkérisé, anneaux de sangle de 1" à l'avant et à l'arrière avec goujons. Le tableau indique le nombre de ROUNDS (RDS) en plus de la capacité du chargeur d'origine pour chaque modèle. 20ga. Rem. convient uniquement aux armes de petit cadre 20ga. et toutes les indentations sur le tube du chargeur devront être enlevées pour un bon fonctionnement. * 11-87 nécessite des modifications.
Plus...
Screw-On Tubes For Increased Capacity
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately.
SPECS: Extension - Steel, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp - Blued or parkerized steel, front and rear 1" swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory magazine capacity for each model. 20ga. Rem. fits small frame 20ga. guns only and any indentions on the magazine tube with have to be removed for proper functioning. * 11-87 requires modifications.
Plus...
Évaluations client de CHOATE REMINGTON 870/1100/11-87 3 ROUND EXTENSION
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4,6
Awesome addition to my 28" Wingmaster(04/09/2014)
I scored a 1958 Wingmaster in near mint condition from a pawn shop for next to nothing, then sold the original forend and stock off of it to finance this extension, a new forend tube, Magpul forend, Vang Comp follower, ATI polymer mag tube clamp, and a Remington polymer thumbhole stock. After all was said and done, I ended up paying less than $100 for an awesome gun that points amazingly well, even when loaded with 10 rounds of #1 buck. It's my tactical long-barrel shotgun! My friends get a kick out of it and it's still a beautiful gun, even without the original walnut furniture. Anyway, I went with the Choate because of the price and capacity and ended up really liking it. It's bluing matches well with the barrel and receiver of the old gun. It's functioned with 100% reliability through hundreds (I would estimate around 700) of rounds of mixed buck, slugs, and field loads and it still looks new! My other 870 is an 18" original Express (metal trigger guard, machined internals) that has a Nordic tube with an XL cap that sits flush with the barrel and allows me to load 7 in the mag. ...and while I love it, I paid a lot for the setup - this was way more economical. I only wish they made a +6 or +7. I still have barrel sticking out! Thanks Choate!
build it like you want it and save!(15/09/2009)
currently have this on my Rem 870 for house protection. i really like this one and it saved me alot of money. i purchased a used 870 with an 18 barrel for $150 and added this product to it. a tactial remington with the factory extension would cost $450 to $599. the money i saved went in the till for some shot shells. i mean alot of shells.
4 round extension installed on model 870(09/01/2017)
Purchased this so I could better use my 870 in some 3 gun matches. Gives me a total of 8 rounds in the magazine. Looks to be quality product. Note that my model 870, a turkey model with 21" barrel, had tabs inside the factory magazine tube which I had to use my dremel tool and grind down the two tabs so that shells and the follower could slide up into the extension. Just took a few minutes, but just be aware that some gunsmith work might be required depending on your model 870. My barrel is 21", but with the full choke screwed in, that extends another 1". This puts my barrel at 22" and exactly even with the extension tube end.
Choate Magazine Extension(06/03/2010)
A well manufactured piece. The fit and fnish were nice and the parkerizing was well done. The installation required a little work with a metal file as simply using a 3/16" bit to remove the dimples in my rem 870 magazine tube was not sufficient to allow the plug which came with the extension to smoothly pass through the tube where the dimples were drilled out. After working it a little bit with the file, it functioned smoothly.
Works like it's supposed to!(18/07/2010)
Used this product for a build of my 1100 for social use. Very durable item with the barrel brace and high visibility orange follower. You can't go wrong with this.
Choate Magazine Extension(25/06/2016)
I wanted to extend the factory magazine tube on my 870 Express. It is being set up primarily for home defense but is also used for fun shooting. I went with the 3 round extension as didn't see a need at this time for more.
I had a local gun smith properly remove the dimples. Once installed shells cycled smoothly. I liked the dull coating as it matches both my barrels. The brace will keep the tube extension lined up and also from working free.
About the only con is the length of the spring. It was a bit of a struggle getting it all together and odds are I may shorten it by a few coils down the road. I'm able to get 7+1 of 2 3/4" double ott buck shells into the gun.
Would buy again(17/10/2009)
Two round parkerized model extends the mag tube to exactly the same length as an 18" factory Remington barrel. Finish is a good match for Remingtons express model finish. Very strong spring, function is perfect.
Excellent choice!(08/04/2013)
Very well constructed magazine extension. This is the best one that we have found by far. Finish is a very deep black, but is not parkerized as the description implies. It is some kind of bake on finish. This is not a drawback as it is a durable finish, but should be correctly disclosed.
As a gunsmith, I have installed a number of magazine extensions from various manufacturers and they tend to come off during use. This is not the case with this extension. It would be near impossible to remove this inadvertently. Buy this with confidence!
Awesome Quality(11/04/2013)
I am a gun enthusiast and am very familiar with shotguns. I switched from 20" barrel to 18.5" Police barrel. I needed a shorter mag extention. I went with the Choate 2 round b/c of their quality and reliability. It comes with an extremely durable Parkerized finish. It also mounts securely to the stock mag and mates up well. This comes with a barrel clamp/sling swivel, and a very long spring. I just used the spring from my previous 3 rd mag ext, perfict fit. Otherwise you will have to trim the spring down to the appropraite length (watch video). I would recommend this to anyone.
spring sucks, don't buy(18/09/2017)
The spring was insanely long and had to be cut down. I cut it down little by little and tried it again after every cut and it still does not work well. The spring is now as short as it can be and still offer some amount of pressure on the follower and it still will not fit the +2 shells that it says it will. It will fit one extra but the spring binds up and does not feed reliably at all. This has been really disappointing. I am going to try to keep the tube itself and find a replacement spring. I will not be buying from this company again. This has been a lot of work trying to fit this thing and it still does not work. It only managed to get 2 stars because it at least looks nice...but looks don't do me any good.
It is a very nice 870 addition (18/12/2017)
Fit and finish are both great. I also found this very nice aluminum magazine / barrel clamp - part # 100-003-182
BCTXX1200 - CLAMP WITH TAC RAIL
at Brownell's that includes a rail section to add a light or laser. Very cool add on for my tactical 870. Looks awesome. As for the factory dimples in the stock mag, a Dremel tool and sandpaper drum made short work of any follower obstructions. The 870 cycles all 6 rounds nice and smooth. Make sure that you stuff a paper towel down the primary mag between the receiver and the dimples before you start grinding, to keep the abrasive crud out if the works. I also put a few small dabs of grease where the paint was ground off. May repaint later. we'll see,
Aide et contact
(0) 
Newsletter
Vue classique
Vue mobile