Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

45™ NO GUNSMITHING

957000035

Si tu as un ancien Ruger® MKI, MKII™ MK4 qui n'est pas percé et taraudé, tu peux installer ce WEIG-A-TINNY® Scopemount sans faire de modifications permanentes à ton pistolet préféré. Retire la hausse arrière, insère le remplisseur de queue d'aronde fileté et installe le support avec les vis fournies. Accepte tous les anneaux et accessoires de style Weaver et la plupart des anneaux et accessoires Picatinny. Longueur de 5-1/4", finition anodisée mate argentée ou noire, pèse 2,5 onces.

Plus...

If you have and older Ruger® MKI, MKII™ MK4 that's not drilled and tapped you can install this WEIG-A-TINNY® Scopemount without making any permanent alterations to your favorite pistol. Remove the rear sight, insert the threaded dovetail filler and install the mount with the screws provided. Accepts all Weaver style rings and accessories and most Picatinny rings and accessories. 5-1/4" long, silver or Black, matte anodized finish, weighs 2.5 ounces.

Plus...

Évaluations client de WEIGAND COMBAT RUGER MK I, MK II, 22/451-PIECE BASE, BLACK

Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4,6

Gunsmith's Dream (04/11/2009)

The answer to mounting optics to Ruger MK I & MK II Pistols that are not drilled & taped at the factory (non adjustable sights). Just knock out the old sight install the provided dovetailed insert in it's place and fasten on the new base. Doesn't get any more simple than this and the base looks "like it belongs there". No modification to the receiver required.

Good Moiunt (19/12/2009)

I like everything about this mount except it is very tall. Raises the scope center point high above the bore center. This is not such a problem at long range but makes short range shooting more complicated (hold over changes drastically at short ranges.) Mid range trajectory goes higher above sight line than if sight were closer to bore center line. I think they could make this mount thinner. Overall well made, easy to install and solid well engineered. I would buy this again. Slight filing on the steel dovetail mounting block was required. A few light passes is all it took on mine. Tapped it into polace with brass punch.

Easy to Install - Solid Mount (14/02/2011)

I installed this mount on my Ruger 22/45 Target Model, and it went on with no issues. The mount is well finished and machined, and goes on without issue. Tap out existing rear sight with a no-mar removal tool or punch, insert the dovetail base, then attached with the provided screws. I mounted a Burris Fastfire II to it with no issues - works nicely and looks great. Main comment is that it would have been nice if an allen wrench (microscopic size) for the set screws for the base were included in the kit, but I managed to find one to fit them. I would recommend this mount for small red dot sights and very small handgun scopes, due to lack of front tie down screw (but no gunsmithing mods are needed with this rail!). Good product.

Great Service and Great Mount (31/05/2012)

Received the mount in 2 days! It fits exactly as stated. Just a slight tap from a small hammer and it went into the dovetail on my Ruger Mark I. You'll need a couple of Allen wrenches but we all have them anyway. I also used Locktite. Great product to mount a red dot scope on the pistol.

The way to go (22/04/2016)

As advertised, if you have a Ruger Mark I or Mark II and don't want to spend a lot of money having it drilled and tapped for a red dot or scope this is the way to go. Very good directions, simple to install and looks very good. I installed it on a Mark II, put a red dot on it, sighted it in and shot 100 rounds (at customer's request) with no movement of the rail. I call that "very good".

Lire 5 plus d'avis sur brownells.com

84.9 84.9 2 EUR

Référence: 957000035
WEIGAND COMBAT RUGER MK I, MK II, 22/451-PIECE BASE, BLACK
Ref Fabricant: RM2SMB Si tu as un ancien Ruger® MKI, MKII™ MK4 qui n'est pas percé et taraudé, tu peux installer ce WEIG-A-TINNY® Scopemount sans faire de modifications permanentes à ton pistolet préféré. Retire la hausse arrière, insère le remplisseur de queue d'aronde fileté et installe le support avec les vis fournies. Accepte tous les anneaux et accessoires de style Weaver et la plupart des anneaux et accessoires Picatinny. Longueur de 5-1/4", finition anodisée mate argentée ou noire, pèse 2,5 onces.

84.9 EUR 1 84,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Couleur: Noir Fabrication: Ruger Matériau: Aluminum Modèle: Mark II Nombre de bases: 1-Pièce Style: Embases Style Weaver

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Installe ce montage sans modifications permanentes sur ton Ruger® MKI, MKII™ ou MK4.
Compatible avec tous les anneaux de style Weaver et la plupart des accessoires Picatinny.
Disponible en finition argent ou noir, léger avec seulement 2.5 onces.

Caractéristiques

Couleur: Noir Fabrication: Ruger Matériau: Aluminum Modèle: Mark II Nombre de bases: 1-Pièce Style: Embases Style Weaver Poids du colis: 0,068kg Hauteur d'expédition: 10mm Largeur d'expédition: 86mm Longueur d'expédition: 170mm

Détails de l'article

Fabriqué au USA

Opérateur économique responsable conformément au règlement de l'UE

Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr

Référence: 957201100
WEIGAND COMBAT RUGER MK I, MK II, 22/451-PIECE BASE, SILVER
Ref Fabricant: RM2SM Si tu as un ancien Ruger® MKI, MKII™ MK4 qui n'est pas percé et taraudé, tu peux installer ce WEIG-A-TINNY® Scopemount sans faire de modifications permanentes à ton pistolet préféré. Retire la hausse arrière, insère le remplisseur de queue d'aronde fileté et installe le support avec les vis fournies. Accepte tous les anneaux et accessoires de style Weaver et la plupart des anneaux et accessoires Picatinny. Longueur de 5-1/4", finition anodisée mate argentée ou noire, pèse 2,5 onces.

84.9 EUR 2 84,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Couleur: Argent Fabrication: Ruger Matériau: Aluminum Modèle: Mark II Nombre de bases: 1-Pièce Style: Embases Style Weaver

Ajouter à la Liste d'Envies

Poser un question