Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

ED BROWN
1911 TWO-PIECE GUIDE ROD

800732889009 087045889

Prévient le blocage du ressort de recul ; Facilite le démontage

Conception en deux pièces de pleine longueur qui soutient entièrement le ressort de recul pour aider le pistolet à chambrer, extraire et fonctionner plus en douceur. Aide à prévenir le blocage du ressort, rend le démontage de la glissière rapide et simple. Tête résistante aux chocs et tige en acier inoxydable durcie qui résistent à la fois à l'utilisation en compétition et en service.

SPÉCIFICATIONS : Acier inoxydable. Comprend le bouchon de guide et une clé Allen de 5/32".

Plus...

Prevents Recoil Spring Bind; Makes Takedown Easier

Full-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use.

SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.

Plus...

Évaluations client de ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"

Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 4,4

It may work with some machining (03/05/2010)

Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.

NOT TOO LONG FOR 4.25" COMMANDER (27/09/2012)

THIS IS VERY WELL MADE PART. DROPS RIGHT IN ON TRUE COMMANDERS. JUST MAKE SURE IT'S A 4.25" BARRELED COMMANDER. IF YOUR COMMANDER HAS A 4" BARREL IT WILL OBVIOUSLY BE A LITTLE LONG. I'VE PUT THEM IN COLTS & DAN WESSONS FOR CUSTOMERS & THEY WHERE VERY PLEASED!

Great product (01/09/2016)

This is a high quality product. It's sized perfectly for my Colt pistol.

Controls heavy recoil from +P loads (06/01/2012)

I wasn't really looking to upgrade my mil-spec guide rod until I test fired a friends 1911 with this product installed and I was amazed at the difference. Needless to say it is installed in my weapon and it truly tames those +P rounds. I wouldn't recommend firing super hot ammo all the time, but I like to practice with what I intend to use for self defense. I loved this product!

Good Rock Island1911 after alteration (25/02/2012)

I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.

Good after minor alteration (25/02/2012)

It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.

EASY UPGRADE (27/09/2012)

I'VE INSTALLED ALOT OF THESE IN CUSTOMERS GUNS. COLT, SPRINGFIELD, KIMBER, DAN WESSON, TAURUS, ETC.. ALL THE BENEFITS OF A 1-PIECE GUIDE ROD BUT MAKES IT MUCH EASIER TO DISASSEMBLE. I'VE NEVER HAD TO GRIND ON 1 OR MODIFIY IN ANY WAY. BEAUTIFUL FINISH, LOOKS LIKE ONE SOLID PIECE UNTIL YOU UNSREW IT.

Over All Good Drop In Upgrade (09/06/2014)

I installed this on my Ruger SR1911 and it was a perfect fit. The OAL was spot on. Very easy to install (if you can field strip your weapon you can install this part)and the included allen wrench actually fits. A bit of a rarity as far as included tools go these days, and it's not a soft steel wrench that rounds off easily. Not that you need a lot of torque on this. The spring cup to guide rod fit is surprisingly tight. Another advantage that is not in the description is a little added muzzle weight. Not enough to be a bother while sighting but helps to reduce muzzle rise just slightly. I also suspect the spring cup to be slightly thicker between the spring and barrel bushing. The new parts went in a little stiffer than the factory parts did. My pistol only had about a box of ammo through it before the upgrade.
The only thing I think I'll be doing to improve this part is a bit of polishing. I can feel the spring rub against the guide rod, but if I were more patient I'm sure the parts would smooth themselves out with a few trips to the range.
In conclusion I would recommend this as a simple upgrade to any level of 1911 shooter. I'll be ordering more for my other govt' models.

1911 TAURUS (30/06/2015)

Fits perfect on my taurus PT 1911

Lire 9 plus d'avis sur brownells.com

54.9 59.9 2 EUR

Référence: 087045889
ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"
Ref Fabricant: 889 800732889009 Conception en deux pièces de pleine longueur qui soutient entièrement le ressort de recul pour aider le pistolet à chambrer, extraire et fonctionner plus en douceur. Aide à prévenir le blocage du ressort, rend le démontage de la glissière rapide et simple. Tête résistante aux chocs et tige en acier inoxydable durcie qui résistent à la fois à l'utilisation en compétition et en service.

54.9 EUR 9 54,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: 1911 Modèle: Government

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Conception en deux pièces qui soutient entièrement le ressort de rappel pour un fonctionnement plus fluide.
Facilite le démontage de la glissière et prévient le blocage du ressort de rappel.
Fabriqué en acier inoxydable avec une tête résistante aux chocs, idéal pour la compétition et le service.

Caractéristiques

Fabrication: 1911 Modèle: Government Poids du colis: 0,064kg Hauteur d'expédition: 13mm Largeur d'expédition: 83mm Longueur d'expédition: 146mm UPC : 800732889009

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Référence: 087045890
ED BROWN TWO PIECE GUIDE ROD FITS COMMANDER 4 1/4"
Ref Fabricant: 889C 800732889023 Conception en deux pièces de pleine longueur qui soutient entièrement le ressort de recul pour aider le pistolet à chambrer, extraire et fonctionner plus en douceur. Aide à prévenir le blocage du ressort, rend le démontage de la glissière rapide et simple. Tête résistante aux chocs et tige en acier inoxydable durcie qui résistent à la fois à l'utilisation en compétition et en service.

59.9 EUR 2 59,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: 1911 Modèle: Commander

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Améliorez votre 1911 avec le guide rod Ed Brown en acier inoxydable. 🌟 Démontage facile et performance optimale pour le tir !

Prévient le blocage du ressort de recul ; Facilite le démontage

SPÉCIFICATIONS : Acier inoxydable. Comprend le bouchon de guide et une clé Allen de 5/32".

Plus...

Prevents Recoil Spring Bind; Makes Takedown Easier

SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.

Plus...

Évaluations client de ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"

Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 4,4

It may work with some machining (03/05/2010)

Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.

NOT TOO LONG FOR 4.25" COMMANDER (27/09/2012)

Great product (01/09/2016)

This is a high quality product. It's sized perfectly for my Colt pistol.

Controls heavy recoil from +P loads (06/01/2012)

Good Rock Island1911 after alteration (25/02/2012)

I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.

Good after minor alteration (25/02/2012)

It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.

EASY UPGRADE (27/09/2012)