Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 249 €

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

WILSON COMBAT
1911 BEAVERTAIL GRIP SAFETY

874218000660 965298001

Deux styles, tous deux avec un design éprouvé en compétition qui élimine le coup de marteau

La sécurité de poignée large répartit le recul sur une plus grande surface de la main pour un confort accru. Les modèles standard des beavertails présentent une "queue" évasée qui guide rapidement la main en position et élimine totalement le coup de marteau sur la zone entre le pouce et l'index. Le modèle High Grip a une "queue" surélevée qui pousse le poignet dans une position droite pour un meilleur repérage et une récupération plus rapide, ainsi qu'un coussinet surélevé pour un contact positif avec la paume. Nécessite un contour du cadre et un ajustement au support de la détente.

SPÉCIFICATIONS : Fini satin en acier inoxydable, acier bleu ou alliage d'aluminium. .835" (21.2mm) de l'arrière du trou à la pointe. S'adapte aux séries 70 & 80/90 avec bloc de percuteur.

Plus...

Two Styles, Both With Competition Proven Design That Ends Hammer Bite

Wide grip safety spreads recoil out over a larger area of the hand for increased comfort. Standard Model beavertails feature a flared "tail" that quickly guides hand into position and totally eliminates hammer bite on the web between the thumb and finger. High Grip Model has an upswept "tail" that pushes the wrist into a straight position for faster sight pickup and recovery, and a raised pad for positive palm contact. Requires contouring frame and fitting to the trigger stirrup.

SPECS: Satin finished stainless, blued steel or aluminum alloy. .835" (21.2mm) from rear of hole to tip. Fits Series 70 & 80/90 with firing pin block.

Plus...

Évaluations client de WILSON COMBAT BLUE SAFETY

Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 3,8

Perfect fit (23/10/2012)

Dropped in without any alterations on my Colt Delta Elite. Doesnt match the brushed stainless finish exactly but holster wear will take care of that.

A must have addition to any 1911. (23/02/2013)

Just finished installation on my para GI expert and couldnt be more pleased with appearence and feel. A radius jig is a must for installation. Take your time and be patient and you will be very pleased. BTW I polished the beaver tail to a mirror finish but that just my prefference. Now lets go puts some rounds through it.

If you like learning by doing ... (10/04/2010)

I am happy with the finished product, but I had to really work at it. The directions that come with this product are illegible and useless. I gave it only three stars based on that. If you are okay with learning a lot and have the time (took me about 8 hours, next time will be half of that or less) then this is a good weekend project. I put it on my Para G.I., because it was biting my hand. You will need to re-finish the frame afterwards if looks matter. Have a good set of metal files, wear gloves when doing the filing, and you might want to put several layers of tape all around the filing area in the event of the inevitable slips.

Wilson Combat, it doesn't get any better (14/08/2010)

Easy to install. Solid, high quality product.

Fitting required. (21/01/2011)

Ordered for my colt delta elite, installed with the recomended jig. Good idea. Quite a bit of fitting requirered. But once installed functioned flawlesly. Worth the effort.

I would buy again (28/04/2011)

Take your time and it will turn out great. Need to buy the jig.

Perfect fit Springfield Armory Mil Spec (10/02/2012)

This is my first attempt working on 1911s. I own a SA Mil Spec 1911-A1 and it is a sweet gun. I changed the B tail grip, hammer, and sear. It was fairly simple with some help from youtube vidieos. I did not have any problem with the original grip safety on the mil spec just like the looks and feel of the Btail better. I am very happy with Wilson Cambat quality and prices. Also I am very pleased with Brownells service and prices. This is my first but not my last purchase from Brownells.

Casting Issues (12/03/2012)

I bought this grip safety for a new build. I inspected it and found excessive flashing from the injection mould process. It was located along the groove for the hammer strut and on the trigger stop tang. Wanting to move along with my project, I filed the flashing off. I was not completely satisfied that I had to do this much finishing work, I ordered the Bullet Proof Grip safety from Wilson. Much higher quality. I had another issue with a Wilson thumb safety that was cast. The pin was oversize and out of round. Lessons learned. From now on I will be using machined parts rather than cast. I feel Wilson's should be leaning on the company they contract to do their injection moulding about the quality issues.

Excellent Product (20/07/2012)

I bought this to install in a Caspian Frame Build. Buy the fitting jig and the installation/fitting is a snap. Great upgrade from stock.

Major fitting may be needed (13/03/2015)

FFL/SOT at GMF we run a small business so value matters,but not at the cost of quality. Most of the 1911s customized are Colt s70. These beaver tail safety's are Absolutely NOT as good as the bullet proof steel parts,but if your on a budget and need a good cast part these are trustworthy. After modifying frame with fixture some require lots of fit and polish. Others drop right in.

<img width="500" src='/userdocs/reviewimages/f3896b4c-25aa-4522-b833-f2ce09c9ea55.jpg' alt=''>

Good product (26/03/2015)

Not exactly drop in, and the finish is far from blue it's closer to cheap parkerizing. It's a dull black finish and I would recommend a gunsmith to install but with patience and some utube vid watching you might get it done without needing to buy another one. Good luck.

wilson problems (23/04/2015)

The 298b grip safety I received was not even close to a

premium product. It had more than one dimensional

problems. Wilson did not offer any help except to contact

where I bought it and how good the more expensive grip

safety was.

When I contacted Brownells, They honored there return

policy just like they advertise.

Brownells still has the service that a lot of companies have

lost.

Thanks, George Butler

Easy Peasy! (02/03/2017)

I purchased this grip safety to replace the original grip safety on my Rock Island Armory 1911 G.I. model 45 ACP. I watched a pro perform this operation on YouTube and followed exactly what he did. This truly is a drop in safety, and was extremely easy to put in with no modifications, other than a commander style drop in hammer, to the pistol what so ever. It was that simple, and now I don't get the old hammer bite, complete with bloody skin, when I shoot the pistol. I am extremely pleased that I found this through Brownell's and I will now buy all my gun parts through this fine company.

Lire 13 plus d'avis sur brownells.com

69.9 69.9 2 EUR

Référence: 965298001
WILSON COMBAT BLUE SAFETY
Ref Fabricant: 298B 874218000660 La sécurité de poignée large répartit le recul sur une plus grande surface de la main pour un confort accru. Les modèles standard des beavertails présentent une "queue" évasée qui guide rapidement la main en position et élimine totalement le coup de marteau sur la zone entre le pouce et l'index. Le modèle High Grip a une "queue" surélevée qui pousse le poignet dans une position droite pour un meilleur repérage et une récupération plus rapide, ainsi qu'un coussinet surélevé pour un contact positif avec la paume. Nécessite un contour du cadre et un ajustement au support de la détente.

69.9 EUR 7 69,90 € *

Délai de livraison environ 14-21 jours.

Caractéristiques: Fabrication: 1911 Finition: Bronzé Main: Droit Modèle: Government, Commander, Officers Style: Poignée

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

La sécurité de poignée large offre un confort accru en répartissant le recul sur une plus grande surface.
Le modèle High Grip améliore la position du poignet pour une acquisition de visée plus rapide.
Compatible avec les séries 70 & 80/90, nécessite un ajustement au levier de détente.

Caractéristiques

Fabrication: 1911 Finition: Bronzé Main: Droit Modèle: Commander,Government,Officers Style: Poignée Poids du colis: 0,054kg Hauteur d'expédition: 32mm Largeur d'expédition: 83mm Longueur d'expédition: 178mm UPC : 874218000660

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Opérateur économique responsable conformément au règlement de l'UE

Brownells France
Immeuble l'Horizon 3 Rue Jacques Constant Milleret
42000 Saint-Étienne
France
contact@brownells.fr

Référence: 965298002
WILSON COMBAT STAINLESS SAFETY
Ref Fabricant: 298S 874218000677 La sécurité de poignée large répartit le recul sur une plus grande surface de la main pour un confort accru. Les modèles standard des beavertails présentent une "queue" évasée qui guide rapidement la main en position et élimine totalement le coup de marteau sur la zone entre le pouce et l'index. Le modèle High Grip a une "queue" surélevée qui pousse le poignet dans une position droite pour un meilleur repérage et une récupération plus rapide, ainsi qu'un coussinet surélevé pour un contact positif avec la paume. Nécessite un contour du cadre et un ajustement au support de la détente.

69.9 EUR 0 69,90 € *

En rupture de stock, environ 4-12 semaines à partir de l'entrepôt principal.

Caractéristiques: Fabrication: 1911 Finition: Acier Inox Main: Droit Modèle: Government, Commander, Officers Style: Poignée

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Découvrez la sécurité de poignée large Wilson Combat pour 1911 🔒. Confort et performance améliorés, parfait pour votre arme !

Deux styles, tous deux avec un design éprouvé en compétition qui élimine le coup de marteau

SPÉCIFICATIONS : Fini satin en acier inoxydable, acier bleu ou alliage d'aluminium. .835" (21.2mm) de l'arrière du trou à la pointe. S'adapte aux séries 70 & 80/90 avec bloc de percuteur.

Plus...

Two Styles, Both With Competition Proven Design That Ends Hammer Bite

SPECS: Satin finished stainless, blued steel or aluminum alloy. .835" (21.2mm) from rear of hole to tip. Fits Series 70 & 80/90 with firing pin block.

Plus...

Évaluations client de WILSON COMBAT BLUE SAFETY

Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 3,8

Perfect fit (23/10/2012)

Dropped in without any alterations on my Colt Delta Elite. Doesnt match the brushed stainless finish exactly but holster wear will take care of that.

A must have addition to any 1911. (23/02/2013)

If you like learning by doing ... (10/04/2010)

Wilson Combat, it doesn't get any better (14/08/2010)

Easy to install. Solid, high quality product.

Fitting required. (21/01/2011)

Ordered for my colt delta elite, installed with the recomended jig. Good idea. Quite a bit of fitting requirered. But once installed functioned flawlesly. Worth the effort.

I would buy again (28/04/2011)

Take your time and it will turn out great. Need to buy the jig.

Perfect fit Springfield Armory Mil Spec (10/02/2012)